- City
- Biloxi
- State
- MS
This is an antique dwell meter and "tuning" device- 😎
![]()
Sent from my SM-G920V
That is awesome

All I have is an old Analog Sears Dwell/Tachometer, but I love it


This is an antique dwell meter and "tuning" device- 😎
![]()
Sent from my SM-G920V


They engineer it that way so you bring it to the dealer, so they can make some money. They don't want shade tree mechanics working on their high priced steel
Sent from my iPad
Thanksgiving day would be difficult, we've got 40 plus for dinner....unless you just show up to eat like everyone else. Maybe on your return trip.Thanks John. Sure. Not sure how we can get it arranged, but I am driving through Richmond area for Thanksgiving at my parents place in Hampton.
And you need to check the timing
I might have missed it but when was the last time the carb was rebuilt? It's acting like the accelerator pump isn't working at all when you open the butterfly. Try opening it all the way with it not running while looking down the throat. you should see it squirt fuel into the throat if not then you've got a problem either getting fuel to the carb or the accelerator pump is shot.
Thanksgiving day would be difficult, we've got 40 plus for dinner....unless you just show up to eat like everyone else. Maybe on your return trip.
I gotcha man. You're probably going to have to rebuild the carb prior to being able to time it. You need a pretty much rock solid idle when you're setting it. How much do you know about the quadrajets? Be careful not to flip it upside down it can make the metering rods fall out from what I've been told. But it's imo one of the best carbs around. The poor mans fuel injection
There are a lot of "updates" you should do to it if you rebuild it. [emoji6]
Sent from my SM-G920V
It should be a enjoyable project for y'all. There's several videos on you tube explaining the whole process and there's a website dedicated to the quadrajet. http://quadrajetparts.com that has some decent information and parts
Wow, interesting thread. I had a 68 impala years ago. Pea green and rusted out rear window surround (thanks to a vinyl top). Was a fun car until I got hit by an uninsured illegal who ran off after hitting me. As I remember it had a TH350, not a 400. Mine was a 327 w/fresh 350 heads and a 4bbl quadrajet.
Sorry to hear that you lost it that way. We are learning a lot about this car and Chevys in general.
right up there with my first car bought off my parents. A 69 Caprice 4 door with a 396. Yeah, its in my list of sad history vehicles. Should have kept it and fixed it up, especially knowing now the value of 2 door 60s cars.right up there with my first car bought off my parents. A 69 Caprice 4 door with a 396.
As I think about it, check the door hinges on yours. The doors are pretty long and heavy which can wear the hinges out. Also check the rear windshield trim area. The stainless is a dirt magnet which will cause rust.