Hello Folks,
I'm new to this Forum, but not new to Forums as I'm a member of at least six others related to Jeeps. I've been the owner of seven Wranglers in my time and currently own two, a 2018 JLUR, and a recently restored 2003 Wrangler TJ. I purchased the TJ a little over a year ago and it was bone stock, with 208k miles on the inline six. I have just about finished everything I'm going to do on it, but have one last project to replace the heater and evaporator cores, blower motor, resistors, and vacuum line related to the air diverter.
The list of things done to the TJ is long (and expensive) but as the wife can tell you, everything was on sale or very cheap.......... LOL Since purchasing it, I have nearly updated everything on the Jeep, the list is amazingly long, but here goes - valve cover, valve cover gasket, rear main seal, fuel rail, fuel injectors, spark plugs, coil rail, O2 sensors, heater hoses, vacuum lines, battery cables, front rotor and pads, rear drums and shoes, front and rear diff covers, shocks, coils (2" Rock Krawler lift), track bars (front and rear) sway bar (rear), steering kit (CurrieSync), front/rear upper/lower adjustable control arm, 1" body lift, new aftermarket hardtop, Bartact seat covers, new carpeting (after sanding and spray painting tub interior), new BFG 33" KO2's tires, Mickey Thompson chrome wheels, Tuff stuff front and rear bumpers, 13k Tuff Stuff winch (synthetic rope), Tuff Stuff rear bumper tire carrier, Tough Guard hood deflector, Banks Performance cat back exhaust, Insane Audio system with backup camera, Smittybilt chrome side steps, and Warrior product side armor. This Jeep has zero rust on or under it. I also serviced and replaced all fluids and filters (fuel, engine, air, transmission, transfer case, front and rear diffs).
I'm now thinking seriously about selling it and buying something to be a keeper and a winter project for me to stay busy. I have always had a eye for the CJ-8/Scrambler since they first came out in the 80's. While I love my Wranglers, 1) the Scrambler has always caught my eye, and 2) I want to stay away from anything modern with a lot of computer crap on them. I just finished updating a 1999 BMW Z3 (also a keeper) and working on that engine and suspension is like working on a Swiss watch, I prefer my 1999 Wrangler TJ where there is room to work, part are available and not out of this world expensive.
So here are my Scrambler questions. It appears challenging so far to find a unit that is rust free and hasn't been fully or nearly fully updated. While my garage isn't equipped to swap and engine, I would love to find one possibly where that has been done already. I'm interested and capable of working on just about any other aspect on the Jeep other than dealing with bondo and deep rust.
I would love to get some input on the likelihood of success in finding a Base, Renegade, or Laredo that hasn't been fully dealt with and out of my price range, which is still somewhat flexible.
Bob
PS. While not pertinent to this posting or Forum, I own a Jeep Wrangler online store (The4x4Guys.com) currently we only carry aftermarket parts and accessories for Wranglers, but if I snag a Scrambler for my project, we might be interested in becoming a dealer for more manufacturers that cover the CJ-8 family. Possibly many of our current brands already have Scrambler parts and we are just filtering them out right now.....something for me to think about.
I'm new to this Forum, but not new to Forums as I'm a member of at least six others related to Jeeps. I've been the owner of seven Wranglers in my time and currently own two, a 2018 JLUR, and a recently restored 2003 Wrangler TJ. I purchased the TJ a little over a year ago and it was bone stock, with 208k miles on the inline six. I have just about finished everything I'm going to do on it, but have one last project to replace the heater and evaporator cores, blower motor, resistors, and vacuum line related to the air diverter.
The list of things done to the TJ is long (and expensive) but as the wife can tell you, everything was on sale or very cheap.......... LOL Since purchasing it, I have nearly updated everything on the Jeep, the list is amazingly long, but here goes - valve cover, valve cover gasket, rear main seal, fuel rail, fuel injectors, spark plugs, coil rail, O2 sensors, heater hoses, vacuum lines, battery cables, front rotor and pads, rear drums and shoes, front and rear diff covers, shocks, coils (2" Rock Krawler lift), track bars (front and rear) sway bar (rear), steering kit (CurrieSync), front/rear upper/lower adjustable control arm, 1" body lift, new aftermarket hardtop, Bartact seat covers, new carpeting (after sanding and spray painting tub interior), new BFG 33" KO2's tires, Mickey Thompson chrome wheels, Tuff stuff front and rear bumpers, 13k Tuff Stuff winch (synthetic rope), Tuff Stuff rear bumper tire carrier, Tough Guard hood deflector, Banks Performance cat back exhaust, Insane Audio system with backup camera, Smittybilt chrome side steps, and Warrior product side armor. This Jeep has zero rust on or under it. I also serviced and replaced all fluids and filters (fuel, engine, air, transmission, transfer case, front and rear diffs).
I'm now thinking seriously about selling it and buying something to be a keeper and a winter project for me to stay busy. I have always had a eye for the CJ-8/Scrambler since they first came out in the 80's. While I love my Wranglers, 1) the Scrambler has always caught my eye, and 2) I want to stay away from anything modern with a lot of computer crap on them. I just finished updating a 1999 BMW Z3 (also a keeper) and working on that engine and suspension is like working on a Swiss watch, I prefer my 1999 Wrangler TJ where there is room to work, part are available and not out of this world expensive.
So here are my Scrambler questions. It appears challenging so far to find a unit that is rust free and hasn't been fully or nearly fully updated. While my garage isn't equipped to swap and engine, I would love to find one possibly where that has been done already. I'm interested and capable of working on just about any other aspect on the Jeep other than dealing with bondo and deep rust.
I would love to get some input on the likelihood of success in finding a Base, Renegade, or Laredo that hasn't been fully dealt with and out of my price range, which is still somewhat flexible.
Bob
PS. While not pertinent to this posting or Forum, I own a Jeep Wrangler online store (The4x4Guys.com) currently we only carry aftermarket parts and accessories for Wranglers, but if I snag a Scrambler for my project, we might be interested in becoming a dealer for more manufacturers that cover the CJ-8 family. Possibly many of our current brands already have Scrambler parts and we are just filtering them out right now.....something for me to think about.

Anything listed anywhere online seems to be getting bought up sight unseen ASAP, it a tough market to try to find something right now without paying a premium. Hope you can find one.