• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

100 day summer rebuild

Day 83:

so i have 12 days until move in day and 17 until the first day of school

ITS CRUNCH TIME!
 
Where are we at with it? What is the remaining list of things to do?
Write it down, prioritize it and then check it off one at a time!

cb
 
day 84-85:

this is the plan...


7th:
Finish up the underside of the tub do touch up
Finish back of tailgate
paint doors
Fix body mount
Buy bolts for body mounts
Finish the brake lines
8th:
fix leaf springs
castle nuts
drop pitman arm
Mount exhaust
Fix gas lines
Mount gas tank
9th:
mount the tub
tailights
gas tank hoses
tailgate
10th:
brake boost
bleed brakes
Heater
Steering column
Steering bracket assembly
Buy new wheel

11th:
Dash electrical
Prep hardtop
Paint windshield hinges
Deal with cross member
12th:
windshield and wipers
electrical
wheels
Paint hardtop
13th:
electrical
glass hardtop
starter motor
14th:
Heater
headlights
grill
Radiator
15th:
fluids
Differentials
Transmissions
brakes
Oil
Radiator
Seatbelt harness
Paint roll bar
Clutch linkages
peddles

16th:
bulkhead
rollbar
hardtop
wirer spottlights

17th:
fenders
computer
wirering harness
windshield wiper pump
battery box
18th:
seats
doors
Pin stripe
tire carry
19th:
hood
and other stuff

20th: "move in day"
21st:
22nd:
23rd:
24th: "First day of class"

IMG_2027_zpsaca3fc24.jpg
[/URL][/IMG]
 
Trouble bleeding brakes…

i have a bleeder

just getting lots of air

??????????
 
You need to have someone pump the pedal while you open the blender screw. Unless you have a really high end bleeder system it's the only way to get the air out.
 
Day 100:

well long sort its all done...

after finally getting the the brakes all figured out, i went to the junk yard were i found a 3 point harness for a scrambler... turns out i just bought the whole scrambler....

The white scrambler was all together........ Then i took it to the farm and blowup the universal joint between the driveshaft and the differential......

... now in at college with out the jeep

a>


a>


a>


a>


a>


a>


IMG_2062_zpsdcda1614.jpg
[/URL][/IMG]
 
So do you consider it a success since you got it all done within the 100 days before breaking it? I would count that as a win. But sorry you did not get to take it with you to school.
 
I think getting a 2nd Scrambler is a win, but I have to say the explanation left me wondering how come?
U-joints are easy to replace, hopefully that is your only issue and it isn't something else.

Good job.

cb
 
so the tan one is a parts car and i think I'm going let its sit for a while until i ether sell it or have time for another project....

it was only 500$ and that is the cheapest scrambler i have ever seen.

i have a new yoke at and u-joint for the white one, i just need to find time to put it all together...

i really want to pull the homecoming float with it but i need to find time to do the work...
 
Congratulations on getting to drive it. Seems like an easy fix. :wave:
 
Making the time frame and finding another Scrambler- Win-Win!
 
great job for 100 days of summer and a $500 scrambler .....maybe it could be 16 day winter break build? :)
 
i went to the junk yard were i found a 3 point harness for a scrambler... turns out i just bought the whole scrambler....

a>


a>


Congrats on getting your Scrambler 'done' and look forward to seeing you get the U-joints repaired so you can fully enjoy it at college.

Would you be able to send me some pics of it? Specifically of the exterior, the interior and the engine compartment?

I think I owned this Scrambler years ago, and it'd be awesome to confirm if it is the same one that I sold back in '98 or '99 in Pennsylvania. It has a few distinct characteristics that lead me to believe it is the same one.

It is obviously in a lot worse condition now :banghead:.

Really appreciate it!
 
well i don't have the scrambler with me at school but i can tell you a little bit about it!
 
Congrats! I see enough parts on that $500 Scrambler that I'm sure you could use what you needed off of it and probably still make money selling it!
 
A scrambler up in the air like that on an oversized forklift is just about the coolest pic I have seen in a while. Congrats on getting the white one to where it is, and the new purchase too! :thumbsup:
 
I'm going to fix the yoke on friday...

if i tala differential apart and removing the yoke require i adjust the shimming?
 
Back
Top