• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

401 vs. 360 - Need Discussion

Hey Jake, it's a reasonable price! Go on and buy it and if you don't want it I'll buy it from you since I've been looking for one for what seems like 20 yrs or so.....:D
 
bigwalton said:
Are you talking for a core? I've never come across one that ran that cheap. I would be at their doorstep with $$ in hand simply for the chance to flip it.

I agree that 700-900 is more common.

Another good reason to live in the west.
I bought a 401 for $400 that I put in that copper Scrambler it runs great. I find them out here at that cost from time to time. It was a recycle yard also.
 
Wyoming said:
Another good reason to live in the west.
I bought a 401 for $400 that I put in that copper Scrambler it runs great. I find them out here at that cost from time to time. It was a recycle yard also.
That sounds great and congratulations! Sure would be great for you to run up on a couple more...bring them with you to Clayton in June....and make a couple of guys very happy! Might even be a reasonable profit in it for ya!
 
Came up with some more questions...

Alrighty, as for that compression check....
I've given this some thought and realized quickly that the engine is on an engine stand right now which means it has no bellhousing/automatic bolted to the back of it which, correct me if I'm wrong, means no place to bolt on a starter. Aren't the bolt holes for the starter in the bellhousing? If this is the case, it sounds like a job for a breaker bar on the crank bolt. Which direction should I turn it if facing the front of the engine, clockwise or counter-clockwise?

Next, what would a reasonable variance be in compressions of each cylinder? They won't all be exactly the same right but how much variance between one another would be exceptable? Any ideas?
 
CJ8LVR said:
Alrighty, as for that compression check....
I've given this some thought and realized quickly that the engine is on an engine stand right now which means it has no bellhousing/automatic bolted to the back of it which, correct me if I'm wrong, means no place to bolt on a starter. Aren't the bolt holes for the starter in the bellhousing? If this is the case, it sounds like a job for a breaker bar on the crank bolt. Which direction should I turn it if facing the front of the engine, clockwise or counter-clockwise?

Next, what would a reasonable variance be in compressions of each cylinder? They won't all be exactly the same right but how much variance between one another would be exceptable? Any ideas?
Jake, this is not the time for a compression check...you are probably waisting your time if you can't hook up a starter to it.....not much way to be consistant with the pressure! Building a stand from mount to mount so the bellhousing could be attached thus the starter thus a battey hookup would be a way to accomplish a compression check.
A compression check is normally something you do while the engine is still in the vehicle......with the engine out you may want to pull the intake and heads...look at the valves and cylinder walls to make sure everything looks OK! Here again, if the engine was running when it was pulled out and was running pretty good at that time (based on a reliable source) you may not want to go to too much trouble right now....Personally, I would tear it down, flux it, do a oil modification, rebuild it, put it all back together, then I would know exactly what I had....I have friends that would just throw it into their vehicle start it up and take off and chances are it would run forever! Just depends on you and what you want to do and if you want to take a chance! Seems like I've done a lot of talking but didn't say very much.......but I hope it helps you!
 
When you're buying a used engine, they were all running...until they stopped :rolleyes: . You just can't be sure of when or why they stopped. Like Rick said, at least have someone go through it, check it out and fresh it up with new rings, valve guides and gaskets. I've pulled down supposedly "good" motors with loads of sludge and huge chunks of carbon in the heads around the valves.
 
Thanks guys. Y'all are right. I'm mainly just trying to determine that it is buildable. I plan on going through it anyway. I think my biggest question is if it has been bored. Hopefully I can just re-ring it and go throught the heads and bearings and bolt it back together and throw it in. I'm picking it up this weekend and will report back. Moochos grassyass.
 
Got it.

I've now joined the ranks of JC.

I'll be working on the shrine and candles this weekend to surround the coffee table. :D
 
That thing is pretty dirty; you sure want to keep it? :p :D
 
There's a 401 on Craigslist out here for $500.00 today, and there's been J-truck with a rebuilt 401 and a SOA setup for $1600.00 on there for a few weeks now...
 
Randyzzz said:
There's a 401 on Craigslist out here for $500.00 today, and there's been J-truck with a rebuilt 401 and a SOA setup for $1600.00 on there for a few weeks now...
Don't see the $500 401 can you send me a link?
 
My brother has a 401 in his cj5..and my 5.7 efi chevy has more horses more torque ...starts when its cold hot...whatever.not finiky carb no choke...and i did my conversion for about what it cost him to rebuild his...oh and my fuel economy is about twice as good
 
mopedal said:
Scott, It's a Jeep Thang!:D

I understand..lol...actually i am a big fan of amc v-8's..so if it had electronic fuel injections i might be swayed...but todays engines have come along way in the last 50 years...heck even since my 5.7 was built in the lat nighties...they run stronger and last longer...the most amazing thing is u just walk out reach in and hit the key ..starts runs idles with no other input..

when i blew the 304 that was in my cj5, i stacked a rod bearing and still finished the run..i am pretty sure that a sbc would have thrown the rod....
 
scott anderson said:
I understand..lol......
I knew you understood!
I actually am a Chevy man (until it comes to my Jeeps)....Heck, I even have a LT-1 in my buggy!
Randyzzz said:
If I wasn't so tapped, and had so many ongoing projects too, I'd be all over that Levi Honcho....
Noticed the Honcho has been removed...must have sold it....sounded like a real deal!
 
Truck said:
Honcho linked worked for me...

Truck
Not sure why it came back "removed by owner"....but i tried it again and it worked. Pm'ed him. Thanks!
 
mopedal said:
Not sure why it came back "removed by owner"....but i tried it again and it worked. Pm'ed him. Thanks!
If you're serious about the Honcho- call him. I don't know why, but whenever I email a Craigslist ad, I seldom get a reply.

If you end up getting the Honcho, I know a local shipper who does cross-country runs. I also could store it for a bit at my place if needed.
 
Back
Top