
bigwalton said:Are you talking for a core? I've never come across one that ran that cheap. I would be at their doorstep with $$ in hand simply for the chance to flip it.
I agree that 700-900 is more common.
That sounds great and congratulations! Sure would be great for you to run up on a couple more...bring them with you to Clayton in June....and make a couple of guys very happy! Might even be a reasonable profit in it for ya!Wyoming said:Another good reason to live in the west.
I bought a 401 for $400 that I put in that copper Scrambler it runs great. I find them out here at that cost from time to time. It was a recycle yard also.
Jake, this is not the time for a compression check...you are probably waisting your time if you can't hook up a starter to it.....not much way to be consistant with the pressure! Building a stand from mount to mount so the bellhousing could be attached thus the starter thus a battey hookup would be a way to accomplish a compression check.CJ8LVR said:Alrighty, as for that compression check....
I've given this some thought and realized quickly that the engine is on an engine stand right now which means it has no bellhousing/automatic bolted to the back of it which, correct me if I'm wrong, means no place to bolt on a starter. Aren't the bolt holes for the starter in the bellhousing? If this is the case, it sounds like a job for a breaker bar on the crank bolt. Which direction should I turn it if facing the front of the engine, clockwise or counter-clockwise?
Next, what would a reasonable variance be in compressions of each cylinder? They won't all be exactly the same right but how much variance between one another would be exceptable? Any ideas?
. You just can't be sure of when or why they stopped. Like Rick said, at least have someone go through it, check it out and fresh it up with new rings, valve guides and gaskets. I've pulled down supposedly "good" motors with loads of sludge and huge chunks of carbon in the heads around the valves.Don't see the $500 401 can you send me a link?Randyzzz said:There's a 401 on Craigslist out here for $500.00 today, and there's been J-truck with a rebuilt 401 and a SOA setup for $1600.00 on there for a few weeks now...
mopedal said:Scott, It's a Jeep Thang!![]()
I knew you understood!scott anderson said:I understand..lol......
Noticed the Honcho has been removed...must have sold it....sounded like a real deal!Randyzzz said:If I wasn't so tapped, and had so many ongoing projects too, I'd be all over that Levi Honcho....
Not sure why it came back "removed by owner"....but i tried it again and it worked. Pm'ed him. Thanks!Truck said:Honcho linked worked for me...
Truck
If you're serious about the Honcho- call him. I don't know why, but whenever I email a Craigslist ad, I seldom get a reply.mopedal said:Not sure why it came back "removed by owner"....but i tried it again and it worked. Pm'ed him. Thanks!