• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

AMC20 - Weird Bearing Identification Help

hefavitzen

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
Rock Hill
State
SC
Hey guys, I am swapping my narrow axles for wide and have my old axle out. My old axle has an SSBC disk break setup that I wasn't going to use again, but while taking the axle out I realized why the parking brake isn't working so have changed my mind. So, taking the brackets off of my old axle I found something I haven't seen before and am hoping you all might be able to help me identify it.

I think this is an external bearing-sandwich-thingy.

So, there are no bearing in the end of the axle tube. Instead the bearing appears to be within this red anodized aluminum sandwich between the end of the axle housing and the backside of the face of the axle that the wheel mounts too. Like, the bearing is OUTSIDE of the axle housing!

Have you all seen this before? It's a Summers Brothers kit and while no one says their product isn't good, apparently their customer service is horrible. These axles were upgraded to one-piece by the PO some 20+ years ago, and I haven't yet found any photos of other axles like this.

Anyway, I've got to figure out how to get the crush sleeve off that is holding it in place so I can get the bracket off to put onto the new axles. I'm on the fence about using these "bearing sandwiches" if they will even fit the replacement axles axle shafts.

Hoping you might have some experience with one of these! Jeff
 

Attachments

  • 20210508_185724.jpg
    20210508_185724.jpg
    109.4 KB · Views: 12
  • 20210508_185714.jpg
    20210508_185714.jpg
    122.9 KB · Views: 12
  • ezgif.com-gif-maker.gif
    ezgif.com-gif-maker.gif
    4 MB · Views: 12
Well, seems it is a Summers Brothers original bearing retainer set up. I don't think I'm going to use this as Summers Bros doesn't even make off road stuff anymore.

Here is a link to a thread on Pirate 4x4 from 2003 about this setup and difficulty finding parts and support.

I'll see if I can pull it off without breaking anything and share the pics. I'm curious.

 
I have no clue, but that is definitely cool in some really strange obscure way :thumbsup:
 
Ok, so here is the bearing retainer opened up. Really nice machine work! I hope this cost a fortune, even if I get the feeling it is VERY overengineered.

Here are photos of the device pulled apart. I hope it is at least interesting to you guys. If someone has an interest in these parts, I'm cleaning them up and will be happy to discuss handing them off. Curiosity is a wonderful thing...I just have limited space and an already endless supply of other projects.

Excuse all my messy workbench. It isn't always so messy.

Happy Mothers Day! I'm going to go clean up all of my mess to make myself and my wife happy. Jeff
 

Attachments

  • half-the-retainer.jpg
    half-the-retainer.jpg
    163.6 KB · Views: 15
  • half-the-retainer2.jpg
    half-the-retainer2.jpg
    176.1 KB · Views: 15
  • half-the-retainer3.jpg
    half-the-retainer3.jpg
    461.6 KB · Views: 15
That’s actually a pretty cool design. My biggest fear on the D20 is that the bearing is held in by such a thin retainer (seal and backing plate). At least on the 9” there’s a 1/4” thick retainer. I’m fairly sure you could have a sleeve machined to replace the old one, but probably not worth it.
 
Hey guys, if any of you are the engineer type and want something to tinker with, I'm not likely to use these or to go get a new collar made. They are interesting and are seriously a nice piece but it's something I'll never use. I hate just pitching them, so if you are interested let me know. I'll give them to you. Currently they are attached to a pair of narrow track one piece axle shafts that are very solid and in good condition. But, to get them off to put in new bearings you'll have to get the sleeves off and new ones made to put it back together again.

Let me know, Jeff
 
It has been a while since I looked at any Summers parts. I believe they are (or were) major players in the Baja scene and all of their parts are over engineered as a result.
 
Back
Top