• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Crap!

That looks like an average day on the trail for us, well at least Jason.:p
 
In 1975 on a very foggy morning I had an out of state Ford Country Squire wagon cut across US 50 in front of me driving my '73 CJ-5 and I hit him broad side. I was only doing about 25 in a 65 speed zone due to the fog. Result: Total loss on the full size wagon, The officer put down $0.88 for a can of spray paint for my Runk front bumper. The tow bar mounts tore the whole side open on the ford. Still have the same bumper on MrBeep.

Always good when no one gets hurt. :wave:
 
Well I got it moving under its own power again. Both front leaf springs were bent and trashed, so I bought a replacement 2.5" lift kit from General Spring in Kansas City. Seem like well made springs for the price, much cheaper than anything else I could find, and came with poly bushings and all the U-bolts. Price is $279 before shipping: http://www.generalspringkc.com/product_p/cj25.htm

Near as I can tell it sits very close to where it did with the Black Diamond 3" springs. It had Pro-Comp ES3000 shocks, but one of them got trashed in the wreck, so I'm using the cheapest Monroe gas shocks I could find. Rock-Auto had them on sale for $9/each, so it's worth experimenting. The ride "quality" with the Pro-Comps and Black Diamond springs was absolute garbage. I think a Conestoga wagon would be smoother. So I'm curious to see how the General Springs with cheapo Monroe shocks work.

In total I had to replace:
Spring hanger and shackle hanger, both of which I had spares for from parts Jeeps. Cost $0
Leaf springs. General Spring 2.5" springs (4) with U-bolts and poly bushings: $279
Rubber brake line, Rock Auto: $9
Hard brake line to left front from proportioning valve: $25 for a roll of 25' of copper-nickel-ferrous alloy brake line.
Left front fender: (had a spare) $0.
Tie rod: Omix-Ada with both TRE's from Amazon.com: $65

So this accident cost me a total of around $375 but the Jeep is going to come out better than it was before.
 
That is great news! I bet there isn't a new car out there that could take that kind of hit and be repaired so cheap and be better then it was before! On another note, those cheapo shocks aren't going to do anything for your ride quality.
 
On another note, those cheapo shocks aren't going to do anything for your ride quality.

I'm willing to bet they ride better than the Pro-Comps that were on it. I'm running cheapo Gabriel gas shocks on my CJ5 and it actually rides very nice, much better than the Scrambler did. I think CJ's are much too light for the majority of expensive "off-road" shocks, which are much too stiffly valved for a light vehicle. If you cross reference the part numbers you'll see that the same shock is used on everything from a 3,000 lb Jeep to a 7,000 lb truck. Obviously the Jeep will ride much worse than the truck with the same shock.

Oh and by the way, the kid's 2001 Maxima was totalled. Insurance gave him $4200 for it.
 
Are the leafs already on? Shipping did not take very long then. I would love to see the stance when you can put up a pic. That sounds like a very reasonable price for a mild lift. Looks like I will be getting one in 2013 and this looks like a good candidate.
 
Yes, I installed the new springs today. I ordered them last Friday night and they arrived Wednesday. Pics when I'm done reinstalling the fender and everything.
 
glad is was that cheap to fix.

as for shocks, I'm running Bilsteins on my Scram. They have different valving so you can get what you want for what you want. Im running different valving front to rear. Jeep rides awesome. I actually prefer the ride in the Jeep than I do in my VW Rabbit... seriously. But they are not cheap, however they are worth every penny!!!
 
Just took it for a test drive. Man, what a difference. The ride is 1000 times better than before. Not bad for cheapo $9 shocks. I can't even begin to describe how much better the ride quality is. I know it's a combination of softer springs and different shocks, but it's soooooo much nicer than before. I still don't have the brakes bled good, so I didn't go too far or too fast, but I can tell I'm going to like this a lot. I also put in 4 degree caster shims on the front axle, which improved the handling enormously.
 
That is awesome. I am really interested in this as a way to go later this year. I would love to come see it and get an idea of what a difference it would be compared to mine.
 
Just took it for a test drive. Man, what a difference. The ride is 1000 times better than before. Not bad for cheapo $9 shocks. I can't even begin to describe how much better the ride quality is. I know it's a combination of softer springs and different shocks, but it's soooooo much nicer than before. I still don't have the brakes bled good, so I didn't go too far or too fast, but I can tell I'm going to like this a lot. I also put in 4 degree caster shims on the front axle, which improved the handling enormously.

That is great to hear! :cheers:
 
That is awesome. I am really interested in this as a way to go later this year. I would love to come see it and get an idea of what a difference it would be compared to mine.

Let's try to get together sometime. I'd like to check out your Scrambler, too. You have a fiberglass tub, right? I've been thinking long and hard about going that route to fix rust issues, as I plan to keep using the Scrambler as a daily driver. I'd like to look yours over and hear what you think of it.
 
Come on Toby. The more the merrier.

I am trying to work the Scramble in this year. Sounds like fun.
 
I know this is a few weeks ago. Do you have pictures with the springs installed. Price sounds right. I guess you will have to change your name to Max_Killer now:D
 
Back
Top