• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

firefighter736's Build Thread

Why do I have a feeling you're way further along than what I think? Hope you've been well!

I won't say it's way further along but it's certainly on it's way.

We're doing well, bracing for this storm. I don't think you guys are looking at as much as we are.
 
So I took a week off work last week to hammer down on body work in hopes to get this thing in primer by the end of February.

Removed the snaps and filled the holes in the tailgate and went ahead and put a little body filler on there (not pictured, of course)

jg81XS0Fb5RzQ2z3hPp__DOxtRAZCcCt4OOEAaIV-1.jpg


The only kitty hair I've used on the entire Jeep is in the windshield track. I Por 15'd the area and then kitty haired it to fill in a couple of pin holes. Luckily the track was only rusted a little in the corners.

UnTcx_tVDm7FlD3W5arajvTO43AP5b3K43Rn5MTt-1.jpg


I sanded and POR-15'd a the bad spots on my fenders. The grey is actually POR-15 tie-coat so that I can primer right over it.

ACH15JGJ_XZmXr6T98sAZi5PUw0f9sgkOgC5GcWa-1.jpg
 
I finally welded in the last "big" piece into the body - another driver side floor patch. Still need to clean it up a bit but I'm pretty happy. This was actually a huge pain because there were a lot of competing bends in this spot and this is the 2nd piece I've welded in here (wasn't happy with the first). A little more cleanup and some filler and I'll be super happy.

U9eSeDlvejsagvhORdOfqSqGBbyXuElw9CZwknWQ-1.jpg
 
I spent the rest of the week filling in sunk spot welds and fixing a couple of other spots. If I can stay motivated in the evenings this week then I think I can have this thing ready for the painter by this weekend, next weekend at the latest.

ZMBMhE44IsAuZpn3qHgrk803ekrimCNb3diqWPqJ-1.jpg
 
Tub will be painted not next week, but the week after.

I'm still looking for a T176 and a roller 302 block. I've got everything else for the engine but the block I had was toast and unusable.
 
I think we'll be able to see you coming.
 
Gotta see how this turns out. Always wanted a Gecko Green Unlimited...that was also a color in the running for my copper Scrambler. Just didn't have the cajones...
 
Thanks! It definitely is more Gecko Green than Sublime Green but that's OK. It will be trimmed/striped with black so it will mute it some. Just excited to start seeing parts come back looking shiny!
 
Thanks! It definitely is more Gecko Green than Sublime Green but that's OK. It will be trimmed/striped with black so it will mute it some. Just excited to start seeing parts come back looking shiny!

Black trim, you say!

131_1201_092Bhomecoming_parade2Bjeep_ren-1.jpg
 
Back
Top