- City
- Dexter
- State
- MI
Under the heading of "simple things that you really appreciate"...
I realized that was sick of always looking at the very aged, beat up Grant steering wheel that I had on the Postal and was trying to talk myself into buying a new one (I bought this one used somewhere or other 9 or so years ago and it wasn't in great shape when I got it, but it was dirt cheap).
That wasn't looking like a good idea and it occurred to me that I could do a rare aesthetic project on the Postal and refinish the metal spokes with the Massey Ferguson grey paint I used on my armor, cage and headlight trim rings.
I pulled out the rusty button head screws and found new socket head versions at the local ACE, then out came the flapper wheel and I went to town. Some newspaper, masking tape and some paint fumes later, I'm realizing I should have done this a long time ago...
Here's half of the front spokes cleaned up, you can see how yellowed the finish was on the left. Ick. (Yikes, the clean metal is really clean, just realized how nasty the reflections were in the picture, oh well, you can just imagine it)

All shiny metal. Bad reflections again. I did get a little careless with the flapper wheel trying to do too good a job at removing the original finish and got it tweaked between the top and bottom spokes. Took a good chunk out of the upper right part of the center "hub" in the top spoke
Sure woke me up when the wheel went flying across the bench (I wasn't using the lock position on the grinder for just that possibility, so it cut off immediately when it jerked).

Massey Ferguson grey tractor paint and new socket head screws. Reflection/lighting makes it next to impossible to see what it looks like.

Back in the Postal with my custom SOA logo center cap installed. Made a light spring out of welding wire to hold it in place and still let me pull it out if needed to remove the wheel. Nicely matched to the cage in the background!

Never underestimate the satisfaction you can get from simple little projects. No need to swap engines or axles to make a big impression and put a smile on your face.
Think about how many times a drive you look at your steering wheel!
I realized that was sick of always looking at the very aged, beat up Grant steering wheel that I had on the Postal and was trying to talk myself into buying a new one (I bought this one used somewhere or other 9 or so years ago and it wasn't in great shape when I got it, but it was dirt cheap).
That wasn't looking like a good idea and it occurred to me that I could do a rare aesthetic project on the Postal and refinish the metal spokes with the Massey Ferguson grey paint I used on my armor, cage and headlight trim rings.
I pulled out the rusty button head screws and found new socket head versions at the local ACE, then out came the flapper wheel and I went to town. Some newspaper, masking tape and some paint fumes later, I'm realizing I should have done this a long time ago...
Here's half of the front spokes cleaned up, you can see how yellowed the finish was on the left. Ick. (Yikes, the clean metal is really clean, just realized how nasty the reflections were in the picture, oh well, you can just imagine it)

All shiny metal. Bad reflections again. I did get a little careless with the flapper wheel trying to do too good a job at removing the original finish and got it tweaked between the top and bottom spokes. Took a good chunk out of the upper right part of the center "hub" in the top spoke
Sure woke me up when the wheel went flying across the bench (I wasn't using the lock position on the grinder for just that possibility, so it cut off immediately when it jerked).
Massey Ferguson grey tractor paint and new socket head screws. Reflection/lighting makes it next to impossible to see what it looks like.

Back in the Postal with my custom SOA logo center cap installed. Made a light spring out of welding wire to hold it in place and still let me pull it out if needed to remove the wheel. Nicely matched to the cage in the background!


Never underestimate the satisfaction you can get from simple little projects. No need to swap engines or axles to make a big impression and put a smile on your face.
Think about how many times a drive you look at your steering wheel!Attachments
Last edited:

and it was cheap

