• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Grant steering wheel rehab

bigwalton

Alaskan Postal nutjob
FORUM MANAGER
SOA Member
City
Dexter
State
MI
Under the heading of "simple things that you really appreciate"...

I realized that was sick of always looking at the very aged, beat up Grant steering wheel that I had on the Postal and was trying to talk myself into buying a new one (I bought this one used somewhere or other 9 or so years ago and it wasn't in great shape when I got it, but it was dirt cheap).

That wasn't looking like a good idea and it occurred to me that I could do a rare aesthetic project on the Postal and refinish the metal spokes with the Massey Ferguson grey paint I used on my armor, cage and headlight trim rings.

I pulled out the rusty button head screws and found new socket head versions at the local ACE, then out came the flapper wheel and I went to town. Some newspaper, masking tape and some paint fumes later, I'm realizing I should have done this a long time ago...

Here's half of the front spokes cleaned up, you can see how yellowed the finish was on the left. Ick. (Yikes, the clean metal is really clean, just realized how nasty the reflections were in the picture, oh well, you can just imagine it)
IMG_1592.jpg

All shiny metal. Bad reflections again. I did get a little careless with the flapper wheel trying to do too good a job at removing the original finish and got it tweaked between the top and bottom spokes. Took a good chunk out of the upper right part of the center "hub" in the top spoke :eek: Sure woke me up when the wheel went flying across the bench (I wasn't using the lock position on the grinder for just that possibility, so it cut off immediately when it jerked).
IMG_1593.jpg

Massey Ferguson grey tractor paint and new socket head screws. Reflection/lighting makes it next to impossible to see what it looks like.
IMG_1598.jpg

Back in the Postal with my custom SOA logo center cap installed. Made a light spring out of welding wire to hold it in place and still let me pull it out if needed to remove the wheel. Nicely matched to the cage in the background! :D
IMG_1599.jpg

Never underestimate the satisfaction you can get from simple little projects. No need to swap engines or axles to make a big impression and put a smile on your face. :smokin: Think about how many times a drive you look at your steering wheel!
 

Attachments

  • IMG_1596.jpg
    IMG_1596.jpg
    343.7 KB · Views: 122
Last edited:
Eric, Looks like a great job.. Now you got me thinking about scrapping the laredo wheel that I just bought on ebay for a removable Grant wheel .
 
I have that same wheel. I bought it back in 1990 for another car and put it in my CJ5 in 91. I still have it and I repainted the thing about 6 different times. that is a classic wheel that never goes out of style.
 
Good Job, Eric! I have an aluminum Grant, I have to figure out recovering it (or at least resewing the stitching) some day. For now, "Goop" holds instead of the stitching...
 
Eric, Looks like a great job.. Now you got me thinking about scrapping the laredo wheel that I just bought on ebay for a removable Grant wheel .

I love the removable Grant security wheel. I really feel like its one I the more foolproof options for the opportunistic thief.


 
looks good! I want to try and figure out how to make the factory steering wheel removable.
 
I want to try and figure out how to make the factory steering wheel removable.

That would be cool. With my size, the factory wheel was too large, so moving to the smaller Grant wheel made it much more comfortable to drive. I bet a lot of folks would be interested in something that would work with the stock wheel.
 
yeah, i've never been a huge fan of smaller diameter wheels and I like the stock wheel. Have to add it to my future project list... that is still a mile long...

edit: just went to Summit.. didnt realize they made 15" wheels. some are really nice and stockish looking. probably the route i'll take some day
 
Last edited:
Agreed, I'd have definitely stayed stock if the lower part of the wheel wasn't sitting on top of my thighs all the time.
 
As I recall that steering wheel was in pretty decent shape when you got it ;) and it was cheap:cool:
 
lower your seat?

I lowered the seat in my '73 CJ-5 to attempt to gain more wheel clearance. After most of the day fabing and installing, I jumped in (yes jumped, it was a LONG time ago) I foud my legs were to close to the brake and clutch pedals, couldn't get my foot on them without twisting my ankle. When I tried to get out, I was "deep" enough in the CJ-5 I had major problems getting up & over the side and twisting sideways to get under the stock wheel. Put the stock seat bracket back in and bought a smaller wheel that is still on it today. :thumbsup: :wave:
 
I got that off of you Robert? I couldn't remember where I got it! If it was in pretty decent shape I did some bad things to it :D

I was perfectly happy with the wheel purchase, it's served me well!

As I recall that steering wheel was in pretty decent shape when you got it ;) and it was cheap:cool:
 
I have only two words for the wheel/thigh clearance problem- "Tilt Column"!
 
I got that off of you Robert? I couldn't remember where I got it! If it was in pretty decent shape I did some bad things to it :D

I was perfectly happy with the wheel purchase, it's served me well!


I think it was only about 2 years old. Seems like it was pretty nice. I just wanted an original Jeep wheel, which I got from Ted Wendell. You might have gotten a never used bikini top too. I think that was the first time you came to my house. That would have been about 9 years ago shortly after I got my Scrambler.
 
Back
Top