• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

IAFFCJ 81 Scrambler

Fenders turned out sweet!

I bet you can't get it out of the garage without doing a burn out on those tires. :D

We should have gotten your wife to take a picture of us standing on the tires while working in the engine compartment:crazy:
 
Trying to figure out what to do for paint on the inner fenders that wouldn't be difficult to touch up when it inevitably got beat up from rocks and such. So body paint was out then i remembered the Rustoleum hammered black is closer to a gray than black well gave it a shot and I think it came out pretty well.

IMG_2834.jpg
IMG_2835.jpgIMG_2837.jpg

Also got the brake lines finished up and got tired of waiting for a replacement fitting for the hydroboost so I ordered a new one that will be here in a few days if the other one arrives I guess I will have a spare.

Had just a few minutes before dinner so I fit the air intake. The air cleaner is pretty big and won't fit the dust cover I bought for it and I am not sure I will have room for my ARB compressor so I may have to change the cleaner up but I ordered the ARB compressor so we will see what we can fit this weekend before I order a different cleaner.

IMG_2839.jpg
 
By this year you mean by Nationals, right? Man I wish I could go again this year.
 
I guess it was bound to happen with everything going so smoothly the last few weeks but today was a ISSUES day for sure. got all the brake lines hooked up and filled the master cylinder and ...... leaks EVERYWHERE. Couldn't get a few of the fittings to seal so I made some new lines. Going to wait until another day to check again for leaks frustrating for sure.

Then I painted up my Borgeson steering shaft and figured that it would be a easy win. Went and installed and it hit the Power steering pump reservoir and the pulley hard. Guess my mock up shaft wasn't quite the same.

IMG_2841.jpg

So I spent the next few hours changing out shims and adjusting bolt holes in search of a half and inch. I did eventually get it turns out the MORE mount that moves the box forward wasn't necessary and the original position would have been better for my set up but think we have got it now.

IMG_2842.jpg

Lots of little things did get knocked off the list today while taking break from the frustrating items. I also swapped the horn button from the scrambler on to the CJ7 I have been told this is the correct one. :thumbsup:

IMG_2840.jpg

Last thing for the night I measured the drag link to try and figure out what pitman arm I am going to need. If I am doing the measurements right it looks like I am going to need 4 and 3/4 center to center with no drop. Going to do some more measurements before I buy one. using the stock one at 6 5/8ths made for about 1.5 inch difference from right lock to left lock.
 
By this year you mean by Nationals, right? Man I wish I could go again this year.

Yup that is the goal. I am hoping to get it out for a shakedown run at Gore before hauling it all the way to Nationals but I am going to do all I can to get it there this year.
 
I managed to strain my knee at work (well hoping its a strain) so I have had to take it easy the last few days but I did get a few things done.

Hydro-boost and power steering with redneck rams all plumbed and mostly bleed. I will do some more next time i am in the garage. With no exhaust on this thing you can only run it for so long before the garage fills up with CO and I don't need to loose any more brain cells.
IMG_2846.jpg

I also made some adjustments to the hydro-boost interface with the firewall to get the brake pedal in a place I liked it. took two washers as spacers to push it farther into the engine compartment but now you don't have to make an effort to lift your foot up to hit the breaks. Very close to the same distance interface that the truck has.
IMG_2848.jpg

I was getting sick of sitting on the floor while doing wiring to prepare for the dash to come back from paint so I put the seat in. Gave me a chance to check the pedals and steering wheel fit and everything feels great getting close now.
IMG_2847.jpg

I was a little concerned I wasn't going to have enough room to fit the ARB compressor on the passenger fender like I was planning. I ordered the compact compressor as I wasn't going to use it for anything but the lockers (Power Tank will get air up duty) and it fit like I had left the spot for it. It's mounted a wires run in to the cab just need to figure out final route for air line and get some claps on the harness. Also ran the in cab winch control harness while I was at it and have officially filled the speedo cable hole with wires and harnesses.

IMG_2845.jpg
 
So I bought myself a new flairing tool for my birthday and spent the day fixing all the hard lines on the scrambler. So far I have stopped most of the leaks I think i have one that is still seeping I will try to reseal in the morning I ran out of time this evening.
IMG_2859.jpg
IMG_2861.jpg

I also took some time to mock up a mount for my hydro-assist ram. I think it will work things get a little tight but that seems to be the norm as more and more stuff gets added to the front of this. Will weld it all up tomorrow after I cycle it a few times to be sure nothing binds.
IMG_2866.jpg
IMG_2867.jpg
 
Back
Top