• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

I'm 3/4 of the way to joining the LWB Jeep club...

On a bright note, all of the hardware measurements/install went smoothly. The top was too cool/stiff to finish up today, though. My neighbor offered to let me bring it into his nice garage and heat things up with a propane heater, which should help.

I also had to order some windshield-mounted vertical channel from Bestop for the doors, as this Jeep has never had any top or doors installed. That should be on the way to me shortly.

CJ6BestopInstall_1.jpg
 
Nice looking rig Craig. With some heat you'll have no problem with the top. I LOVE the 6's and really like the way yours is set up.
 
Thanks, guys.

My wonderful neighbor helped me get the soft top installed today. We used his propane heater inside the Jeep to warm it up, which did the trick...barely. It was still super tight! I still have a couple little details to finish up, and have to get a couple door channel pieces from Bestop, as my windshield didn't have them already.

We started a tune-up on the Dauntless, but Napa gave me the wrong points. More to come once I get it fired up & driving.

CJ6BestopInstall_3.jpg
 
Thanks, guys.

My wonderful neighbor helped me get the soft top installed today. We used his propane heater inside the Jeep to warm it up, which did the trick...barely. It was still super tight! I still have a couple little details to finish up, and have to get a couple door channel pieces from Bestop, as my windshield didn't have them already.

We started a tune-up on the Dauntless, but Napa gave me the wrong points. More to come once I get it fired up & driving.

View attachment 107106
If you don’t find the right points, if they’re the Delco style, let me know. I think I still have some in my tool chest from long ago.
 
If you don’t find the right points, if they’re the Delco style, let me know. I think I still have some in my tool chest from long ago.

Thanks, John. Mine's a Prestolite distributor. I ordered a set from Rock Auto last night that looks correct...we'll find out soon enough. The ones from Napa were a mirror image of what I needed, so I'm not sure if they gave me ones for a Delco distributor or what.
 
It's now running...rough, but running. I'm still waiting on some tune-up parts from RockAuto. The gearing feels tall with the 3.73s and 31" tires, but it's also jumpy just because it's running rough. A healthy-sized exhaust leak is also gassing me out in the now-enclosed Jeep. :ROFLMAO: Add exhaust repair to the list (I knew it leaked).

CJ6_AppalachianLandscape.jpg
 
That's a great looking Jeep!!! I'm partial to any fire department Jeep!!! How was the fire dept lettering applied?

It appears to be hand-painted on the hood. The brightest paint (top layer in the middle) has peeled off on the passenger side, and much of it on the driver side, as well. I definitely dig the lettering.
 
The lettering is always the best part. So awesome.

Props to you for truly keeping it stock, but I'd be trashing the points if I wanted to just drive it.

I love it, too.

I understand your suggestion, but I'm specifically trying to avoid any kind of computer control on the Jeep. It'll be an around-town driver (not long distances), so I'll feel it out and see how it goes. If it wasn't such a low-mileage, basically original vehicle, I'd consider a Kubota diesel swap w/mechanical injection.
 
I love it, too.

I understand your suggestion, but I'm specifically trying to avoid any kind of computer control on the Jeep. It'll be an around-town driver (not long distances), so I'll feel it out and see how it goes. If it wasn't such a low-mileage, basically original vehicle, I'd consider a Kubota diesel swap w/mechanical injection.
I get it from the prepper POV, but you could always have the points on the shelf in case of EMP ;)
 
The lettering is always the best part. So awesome.

Props to you for truly keeping it stock, but I'd be trashing the points if I wanted to just drive it.
This! I changed to pertronix on my 641 ford tractor, completely a screwdriver conversion. I would never go back to points. It can easily switch back to points with zero modifications.
 
Back
Top