jeepnjeff1002
Basic User
- City
- Louisville
- State
- KY
Hi everyone, I started a build thread over on jeepforum.com since I was originally rebuilding a CJ7 but I thought maybe this forum would be more appropriate. 
I started back in the spring of 2010 with my first CJ purchase -- a rusted out 1986 CJ7 with a dana 44 rear axle. I spent the next few months tearing it down. I then bought a 1990 Grand Wagoneer for the AMC 360 engine and stronger rear dana 44 axle. Over the next year I stripped the drivetrain from the waggy, parted out the remainder, and had the engine rebuilt. I also bought a completely rust free CJ7 frame. About five months ago I stumbled across an abandoned CJ8 project and I couldn't pass up the chance to get a Scrambler. I bought a set of CUCV axles since the Scrambler was already setup with GM 3/4 ton axles and SOA.
My current plans are:
1) Rebuild axles, brakes, steering components, suspension
2) Cleanup frame, run brake lines, fuel lines, etc...
3) Install engine, transmission, transfer case
4) Cleanup body, finish cosmetics
I want to finish by the end of summer but we all know how these things usually go!
Here are the pics when I first brought it home:
Let's get rid of those square headlights.
I'll be putting a CJ front clip on it.
Here are the CUCV axles when I brought them home:
I also picked up a bunch of dana 60 parts off craigslist:
Tomorrow I'll be posting up all the progress I've made over the last months into one big follow-up post and then I'll continue updating the thread as I go.
.

I started back in the spring of 2010 with my first CJ purchase -- a rusted out 1986 CJ7 with a dana 44 rear axle. I spent the next few months tearing it down. I then bought a 1990 Grand Wagoneer for the AMC 360 engine and stronger rear dana 44 axle. Over the next year I stripped the drivetrain from the waggy, parted out the remainder, and had the engine rebuilt. I also bought a completely rust free CJ7 frame. About five months ago I stumbled across an abandoned CJ8 project and I couldn't pass up the chance to get a Scrambler. I bought a set of CUCV axles since the Scrambler was already setup with GM 3/4 ton axles and SOA.
My current plans are:
1) Rebuild axles, brakes, steering components, suspension
2) Cleanup frame, run brake lines, fuel lines, etc...
3) Install engine, transmission, transfer case
4) Cleanup body, finish cosmetics
I want to finish by the end of summer but we all know how these things usually go!
Here are the pics when I first brought it home:
Let's get rid of those square headlights.
I'll be putting a CJ front clip on it.Here are the CUCV axles when I brought them home:
I also picked up a bunch of dana 60 parts off craigslist:
Tomorrow I'll be posting up all the progress I've made over the last months into one big follow-up post and then I'll continue updating the thread as I go.
.

