• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New guy from SD

rustytankerbean

Legacy Registered User
City
Black Hills
State
SD
I'll start off by saying I am stuck in Kuwait (military) and really bored so this post will be longer than most. I bought a 1985 CJ8 (104,000 miles) in May of last year right before my deployment so I really have not had any time to work on it yet. I've been starting to order some parts for it and I came across this website and thought I would join, it look like there is a lot of great info here. The scrambler I bought was my neighbors who had it since the early 90's. It started out as a 258 with a T5 but somewhere along the line he blew it up and stuck a 360 in it and then decided it would ,better in primer rather than dark brown. About a year ago I convinced him to put some money into it and get it going again. I helped him put on a 4" lift, (black diamond if i remember). brand new tires, 33x10.50. Full hardtop, wrangler rear seat, all new brakes, heater core, and 2 piece axle eliminator. The jeep also came with the half cab, bikini top, half doors, and tons of misc parts from over the years. Right before I left it was having issues starting, and then was running bad and he had enough. I offered to help him figure out what was wrong but he said no. He said I could buy it from him for the parts he had into it..which came up just under $4,000.00. I thought it was a good deal so I picked It up. The starter was going out ( the hard starting) and the carburetor was loose... multiple pieces non the less. I ran into some good luck a few days before leaving and found a guy who had rebuilt a AMC 360 for his CJ7 project and decided to put a supercharged LS engine in instead. He had way to much money and told me it was mine for 250.00. He had receipts for about 1400.00 so how could i go wrong. I really quick "pickled" it and wrapped it in plastic and left. And we are up to now. The Scrambler is sitting in my driveway at home awaiting its rebuilt engine and new paint. I am going to order an EFI kit for it, 99% sure I am going with Howell as it seems simple and reliable. It is going back to original paint which I believe was Chestnut brown metallic, it was dark brown and had "renegade" on the hood in orange and yellow and he said it had some swoopy stripe along the side. Here is a picture of it how its sits. Thanks for reading my rambling about this thing, I'm excited to get home and get it on the road. Any suggestions on the fuel injection thing is appreciated also.

Aaron
IMAG1253-1.jpg
 
First, welcome and thanks for your service :usflag:

Sounds like a fantastic set of deals that you found :drool:

Looks like a great starting place and I look forward to watching it come together when you're back. On the FI, there's an Edlebrock kit that replaces the intake that's really hot looking

35300-1.jpg


http://www.edelbrock.com/automotive_new/mc/efi/pf_amc.shtml

Lots of folks do the Howell and do well with it too, so I don't know that you can really go wrong.
 
First, welcome and thanks for your service :usflag:

Sounds like a fantastic set of deals that you found :drool:

Looks like a great starting place and I look forward to watching it come together when you're back.

Lots of folks do the Howell and do well with it too, so I don't know that you can really go wrong.

Well said thank you for your service and welcome aboard to our family. looking forward to watching your project come together:cheers:
 
Thanks guys!. Real quick question, how do I decode the ID tag? I found the color code(5E) dark brown metallic. My wife sent me a picture of the ID tag under the hood. And I would like to know what all the numbers other than the VIN mean? http://cj7offroad.com/index.php?page=22
this website here helped me with the VIN but my 5th character is an F. I dont see an option with an F? Any ideas?

Other than the VIN on the ID tag there is: From top to bottom



A112805 88

32 5E (paint) 9EJ Honey interior high back seat vinyl Italian purse

Thanks guys

Oh and what is Check number?
 
Last edited:
Welcome!

Thanks for your service! :usflag:

Looks like a great starting place!
 
Back
Top