• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New guy - HI

AusCJ8

Legacy Registered User
City
Melbourne, Australia
State
AU
Im new so thought Id say Hi.

Im from Melbourne, Australia - and fairly recently picked up a Scrambler - which are really hard to find over here.

Ive had 3 TJ's over 11 years modifed to various levels and done quite a bit of wheeling. Decided on a change of pace and was looking for a 7. But then when I found this 8 through a friend I kept an eye on it and bought it as soon as I could.

It was imported from the US in the mid 90s (yep we stole one! ha!) and was fairly stock and (obviously) left hand drive.

The guy that imported spent a number of years and a lot of $'s making it into a great all rounder and converting to "right" hand drive.

BASIC SPECS:

transmission : nv4500 5 speed - deep impact usa (6.32 1st gear) with adavance adapters bellhousing
transfer : d300 with clocking ring
rear diff : rock crusher high pinion dana 60 4.88 ratios and arb locker
front diff : hpd 44 with arb locker and 4.88 ratios and cherro big brakes
suspension : long leaf springs and long travel rancho adjustable shocks
bar work : stock front bar (shorty on in pics) , warn rear bar and tyre carrier , custom
rock sliders , and custom trans skid plate , custom highmount winch plate (winch to come)
tyres and wheels : 16x8 on 35x12.5 Mickey Thompson MTRs

- and yep i know running TJ flares...Lots of other mods - but I think ive covered the major stuff above. Ive done a bit of rewiring, added lights to flares, new wheel and tires.

Its still powered by the 258, so my job will be to get the AMC 360 in it...which will be relatively easy considering the work already done.

Was lucky to pick it up and have a previous owner who really knew what they were doing.

I will get the V8 in and then do some cosmetics to get the body back looking pretty stock.

Will post more pics later - some on the trails - as my daily drivers in the way with these.

Look forward to learning a lot on here. BRENT.

IMG00073201003211443-1.jpg


IMG00072201003211442-1.jpg
 
Welcome. Good looking 8 and very well equipped. That would be a very good find over here, so you really have something special down there. Look forward to seeing more of it.
 
Fantastic! Welcome Brent! That is one seriously sharp looking ride and sure has a sweet list of equipment! :bow:

I really like the way the tailpipe is worked into the body. Don't think I've seen that before, it's a really cool touch. You'll have to do the same on the other side when you get the dual exhaust in with the 360 :D Sure sounds like it's built for a V8.
 
Welcome Brent,
Nice looking Scrambler you have there and quite a good friend to have sold it to you. I deal with a couple of folks over there in your neck of the woods for business and would like to get over there sometime. I might have to bring a Scrambler over with me if they're THAT rare! I'm glad to see you found us.
 
thanks guys. Had a good look over a lot of the builds on here...lot of work under way...I know from my TJs it never ends.

Magnaflow coming out the side is a bit different - each side off the 360 could be intersting...a bit of hot rod about it.

Bugman - You should come on over....plenty of Jeepers over here who'd be happy to show you around and yes they are rare....only ever came out as an Overlander over here - full cab - as far as I know, and the AMC Jeep retail market was short lived - so not alot of CJ's around let alone the pretty long ones!
 
I am glad to know another enthusiast. Thanks for finding this site to share your story. We love our CJ's an d they love our care and attention. LOL - like my one of my dogs. : )
 
Great looking 8 and very well equipped! I spent a short time in OZ mostly around Sydney and up around Cairns doing some diving while on holiday. I really want to go back, there is so much more to see!
 
Welcome, Brent! That's a very nice Scrambler with lots of custom work on it.:thumbsup: Hope you enjoy it, but take good care of it, the really nice ones are rare here so I can only imagine down your way. Just curious, with the cost of gas downunder why are you going with a 360? Seems like a 4.0 head conversion or 4.0 engine swap would be more economical to run and still have adequate power with your transmission and gearing.

Been down your way several times and have a close friend that lives in Melbourne, been to a few Aussie rule football games there. I am currently scheduled to come back to Melbourne in just over a year (June of 2011) so keep me in mind if you need some small parts hand delivered.

Cheers mate,:cheers:

Richard
 
Thanks Richard. Will def. keep you in mind and would be great to catch up when your down here next.

Theres a guy over here at the moment doing a 4.0 (rebuilt as stroker) swap into his CJ with the idea of replicating a late YJ setup. (We never had YJs over here) It will be a more efficient set up but it's his daily driver and will need to cope with peak hour etc.

Its the emotion of the 360 I guess - this is isnt my daily driver, so the cost of gas isnt really an issue - this truck is all about excess and the 360 compliments this.

This is a link to Dom's engine swap on the Aussie Jeep forum, worth a read...the man is into detail!

http://www.ausjeepoffroad.com/forum/showthread.php?t=94435&highlight=stroker
 
Back
Top