AusCJ8
Legacy Registered User
- City
- Melbourne, Australia
- State
- AU
Im new so thought Id say Hi.
Im from Melbourne, Australia - and fairly recently picked up a Scrambler - which are really hard to find over here.
Ive had 3 TJ's over 11 years modifed to various levels and done quite a bit of wheeling. Decided on a change of pace and was looking for a 7. But then when I found this 8 through a friend I kept an eye on it and bought it as soon as I could.
It was imported from the US in the mid 90s (yep we stole one! ha!) and was fairly stock and (obviously) left hand drive.
The guy that imported spent a number of years and a lot of $'s making it into a great all rounder and converting to "right" hand drive.
BASIC SPECS:
transmission : nv4500 5 speed - deep impact usa (6.32 1st gear) with adavance adapters bellhousing
transfer : d300 with clocking ring
rear diff : rock crusher high pinion dana 60 4.88 ratios and arb locker
front diff : hpd 44 with arb locker and 4.88 ratios and cherro big brakes
suspension : long leaf springs and long travel rancho adjustable shocks
bar work : stock front bar (shorty on in pics) , warn rear bar and tyre carrier , custom
rock sliders , and custom trans skid plate , custom highmount winch plate (winch to come)
tyres and wheels : 16x8 on 35x12.5 Mickey Thompson MTRs
- and yep i know running TJ flares...Lots of other mods - but I think ive covered the major stuff above. Ive done a bit of rewiring, added lights to flares, new wheel and tires.
Its still powered by the 258, so my job will be to get the AMC 360 in it...which will be relatively easy considering the work already done.
Was lucky to pick it up and have a previous owner who really knew what they were doing.
I will get the V8 in and then do some cosmetics to get the body back looking pretty stock.
Will post more pics later - some on the trails - as my daily drivers in the way with these.
Look forward to learning a lot on here. BRENT.
Im from Melbourne, Australia - and fairly recently picked up a Scrambler - which are really hard to find over here.
Ive had 3 TJ's over 11 years modifed to various levels and done quite a bit of wheeling. Decided on a change of pace and was looking for a 7. But then when I found this 8 through a friend I kept an eye on it and bought it as soon as I could.
It was imported from the US in the mid 90s (yep we stole one! ha!) and was fairly stock and (obviously) left hand drive.
The guy that imported spent a number of years and a lot of $'s making it into a great all rounder and converting to "right" hand drive.
BASIC SPECS:
transmission : nv4500 5 speed - deep impact usa (6.32 1st gear) with adavance adapters bellhousing
transfer : d300 with clocking ring
rear diff : rock crusher high pinion dana 60 4.88 ratios and arb locker
front diff : hpd 44 with arb locker and 4.88 ratios and cherro big brakes
suspension : long leaf springs and long travel rancho adjustable shocks
bar work : stock front bar (shorty on in pics) , warn rear bar and tyre carrier , custom
rock sliders , and custom trans skid plate , custom highmount winch plate (winch to come)
tyres and wheels : 16x8 on 35x12.5 Mickey Thompson MTRs
- and yep i know running TJ flares...Lots of other mods - but I think ive covered the major stuff above. Ive done a bit of rewiring, added lights to flares, new wheel and tires.
Its still powered by the 258, so my job will be to get the AMC 360 in it...which will be relatively easy considering the work already done.
Was lucky to pick it up and have a previous owner who really knew what they were doing.
I will get the V8 in and then do some cosmetics to get the body back looking pretty stock.
Will post more pics later - some on the trails - as my daily drivers in the way with these.
Look forward to learning a lot on here. BRENT.


Sure sounds like it's built for a V8.
