• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Steve's CJ6

CJ7Pilot

18436572
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Marysville
State
CA
As some of you have seen in the 3rd party sales forum, I picked up this CJ6 the other day, as part of a package deal.

It's in pretty rough shape, but it runs, drives, and stops. In fact I was driving it around this morning, and It's actually pretty fun! It's like a big go-kart... and that's about how I fit in it. ;)

It has an F-head four cylinder engine, T90 transmission, Dana 18 transfer case, and Dana 27/44 front/rear axles. The body is pretty rough... to the point where I don't think it's worth repairing, although someone has obviously already tried. The frame has some repairs as well, that I'll have to look at more closely when I have time.

We all like photos, so here we go:

CJ6 - 1.jpeg

For those who don't believe me about the bondo (it looks like it was wiped on with a cement trowel):
CJ6 - 2.jpeg

CJ6 - 3.jpeg

CJ6 - 4.jpeg
 
Last edited:
Here's a pretty trick custom cross member:
CJ6 - 8.jpeg

A patched frame:
CJ6 - 9.jpeg

And a pipe roll bar, welded to the floor and fenders:
CJ6 - 10.jpeg

This poor Jeep has been rode hard, and put away wet... or not put away at all. I'll give it some easy miles for a while, though. :thumbsup:
 
Growing up in the Jersey Pinelands....that would equal a weekend of a good time and a walk out. Used to buy junkers get em running and to the pits we'd go.
 
That Jeep sure could tell some stories I'd bet. I hope that cross member is pressure treated.😂
 
Those look like the old Selectro hubs. I had those on an early Bronco. You could actually turn them in while wearing gloves. Those were my favorite hubs ever.
 
Those look like the old Selectro hubs. I had those on an early Bronco. You could actually turn them in while wearing gloves. Those were my favorite hubs ever.


X2, GREAT hubs.

That Bondo is impressive. Great that they didn't waste any sand paper.

I really do like it though: the paint (especially the dash), condition and repairs remind me of the rigs we often drove in high school.

I've spent many hours in Agwagons; old Cessna's sit as close to my heart as old Jeeps. Love your hangar.
 
Yeah, these photos do provide some insight to a few of my other compulsions.... ;)
 
The only plane I've ever had which was 'mine' was our '48 Stinson 108-3, in which i got my private and instrument back in the early 90s: long since sold. I got my commercial in my mentor's Swift GC-1B. Ever since then I've only ever flown other people's planes (my favourite being the Westwind Beech 18).... but I really miss hangars and GA life.

One day I would love a little nook much like yours (I hope my envy isn't showing too badly). My Scrambler would look brilliant parked next to another Stinson I reckon.
 
My Scrambler would look brilliant parked next to another Stinson I reckon.
Yep, that would be a fantastic combination! :cheers:

It sounds like you've flown some cool classic planes!
 
Yep, that would be a fantastic combination! :cheers:

It sounds like you've flown some cool classic planes!
Back in the 90s I crop dusted and towed gliders. (Agwagons, Colair, Pawnees, Maul M4). Then in the late 90s I did dispersal in beech 18s and U21s. I got to fly the DC3 a bit before I went to the regionals in '99 and flew the 1900. After September 11th I was downgraded to the right seat of the ERJ and I've only really flown jets since, except for the occasional sea plane my buddy has (super cub on floats).

Your hangar has made me really miss GA.
 
That is awesome. I always thought those were cool but have never owned one. I think I have only ever seen 1 here in town. Would that be a TW hanging around in the background as well?
 
Nice. I have a 87 TW. Needs a few things but runs pretty well. Looking forward to seeing your progress on the 6.
 
Well, the CJ6 has found a new home... I "sold" it to a friend of mine for $56.00. 😜

He runs a fab shop, and does favors for me all the time, but he'll never accept any payment from me. Just today, in fact, he did some milling on a set of swingarm extensions for my TW200, no charge.

I know he really appreciates quirky vehicles (much to his wife's chagrin). Lately, he's been daily driving an old Toyota/Dolphin motor home, but he's also got a selection of VWs, a Corvair, a school bus, and a Honda Grom in his stable... I think the CJ6 will make a fine addition, and will give him a nice change of pace for a while.

He wouldn't take it for free, so I charged him what I had paid in DMV fees. I'm pretty sure I got the better end of that deal. :D
 
Last edited:
Back
Top