• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Sunny Delight - now Shelly 2.0

Today was a productive day. Got the console installed as well as another windshield pull. I’m thinking one final “tweak” pull in a few days and it’ll be done. Next step would be installing the full soft top.

I also got all the seat brackets and sliders cleaned up and painted ready for install

IMG_1128.jpegIMG_1131.jpegIMG_1132.jpeg
 
The windshield is in its final resting spot! Patience is key with these pulls. Tomorrow I hope to get the full soft top installed while I still have the heat on my side for stretching purposes

IMG_1247.jpegIMG_1246.jpeg
 
I also got around to installing the rear fixed seat and passenger seat. Rugged Ridge has come out with what they call “Factory Look” reclining front seats. I also picked up a matching rear seat. I can say this. The seats are comfortable for what they are. I have no complaints about the rear. The front seats also recline which was a big plus for me and are comfortable.

However I do feel they sit higher than the originals. Especially since I added a slider to the seat. For me and my family this really won’t be a big deal but for those folks taller than me (5’9”) it might get a little tight.

I’ll get better pics soon
IMG_1248.jpeg
 
Last edited:
I also got around to installing the rear fixed seat and passenger seat. Rugged Ridge has come out with what they call “Factory Look” reclining front seats. I also picked up a matching rear seat. I can say this. The seats are comfortable for what they are. I have no complaints about the rear. The front seats also recline which was a big plus for me and is comfortable.

However I do feel they sit higher than the originals. Especially since I added a slider to the seat. For me and my family this really won’t be a big deal but for those folks taller than me (5’9”) it might get a little tight.

I’ll get better pics soon
View attachment 123402
A tilt column will help.
 
Full soft top install. This little heater has been used so many times to help with this over the years. Decent amount of stretching to be done due to the top being folded up in storage for over a year. It’s not as far off as the rear sail panels reflect. They angle back quite a bit as most of you know.

It’s only 60 degrees in the garage at the moment. Cool breeze outside with a high of 70 later today. I’ll close up the garage now to retain some heat.

IMG_1257.jpegIMG_1258.jpegIMG_1253.jpeg
 
I would roll it outside with the top on it in the sun. 1 or 2 hours in the sun with the top almost buttoned up and that top will stretch out like pie dough. :thumbsup:
 
Got the call today from Novak. Drivetrain build complete. Delivery scheduled for the end of next week!!!
I'm really leaning towards this option now.
After all the other parts I've collected for different configurations I'm thinking less effort and reliability may be the best chance to get mine back on the road.
Looking forward to all your posts and thoughts. :popcorn:
 
I'm really leaning towards this option now.
After all the other parts I've collected for different configurations I'm thinking less effort and reliability may be the best chance to get mine back on the road.
Looking forward to all your posts and thoughts. :popcorn:
I hear ya. I’ve built multiple CJs over the years for myself and others and have learned so much since the beginning. Piecing something together while frustrating and time consuming can be very rewarding. And as I described early on in this thread that was the goal for this one. I finally came to the realization that it was time to bite the bullet and go with a Novak package. I’ve eyed them for years and determined my time was more valuable spent doing other things while they built the package for me.
 
Surprise delivery this morning! I just got home from taking my daughter to school and a tractor trailer came pulling in. I was supposed to get a call when the shipment was leaving Novak and then a call from the delivery company the day before arrival. Thank goodness I was home!

Let the games begin
IMG_1474.jpegIMG_1475.jpegIMG_1476.jpegIMG_1477.jpegIMG_1478.jpegIMG_1479.jpeg
 
.

Heck yeah, that’ll be fun!

Are you daily driving a JKU? If so, you might be looking at a Hemi swap down the road for it…or picking up a 392 Wrangler.

.
.
 
.

Heck yeah, that’ll be fun!

Are you daily driving a JKU? If so, you might be looking at a Hemi swap down the road for it…or picking up a 392 Wrangler.

.
.
The new ‘27 Ram (JT replacement) honestly sits most of the time. It has less than 300 miles on it at the moment and is 5 weeks old.

I do drive my ‘07 JKU with over 200k miles on it almost daily. I do have plans for an overhaul on it once the new house is complete and I have plenty of room for a teardown as well as having the Scrambler done. Plenty of time to make plans for it. As for now it just plain works as-is.

As far as new Jeeps my wife’s ‘26 JLURX is probably my last new Jeep unless something drastic changes. As with a lot of vehicles I personally feel Jeep has gotten way too big for their britches with MSRPs and their tech is too much. For the money I’ll but something better and modify older Jeeps

@rubclt and I were just discussing this very topic. I wish they would go back to the basics. Of course they will still need to make the top of the line Jeeps for most but why can’t they make a basic Jeep again and let the buyer build as they wish? Think back to the TJ days - how basic you could get one. He!! You could get a TJ without a back seat, no A/C and no roll bar padding if you wanted. I know I know - what I’m wanting is wanted by the few and the masses want the latest and greatest. So I’ll start messin’ with the used stuff.
 
Last edited:
Gotta hand it to Novak - this crate was built to withstand delivery.
IMG_1491.jpegIMG_1494.jpegIMG_1493.jpegIMG_1492.jpeg
 
Back
Top