• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

The Banana Boat

By the way, when I pulled the hose off of the modulator before removing it, fluid came out of the hose. And the modulator has a hole in it. I guess that is where my trans fluid leak was coming from.
 
Silly question but when you did the wires did you make sure that it was at TDC. It sounds like maybe you have the wires 180 degrees out. IIRC, the SBC will run with wires in bad order but make no power. Just because crank was at 0deg does not mean that you were not 180 out. Need compression on #1 plug.

Carl
 
Silly question but when you did the wires did you make sure that it was at TDC. It sounds like maybe you have the wires 180 degrees out. IIRC, the SBC will run with wires in bad order but make no power. Just because crank was at 0deg does not mean that you were not 180 out. Need compression on #1 plug.

Carl

I did not remove the cap, so I just replaced the plugs and wires and put the wires on the same places they were. Then double checked with the firing order online and on the intake. Should not be out 180 unless it was before. Correct assumption?

I will put the new vacuum modulator on tonight when I pick it up. There was a hole in it anyway leaking fluid. And the more I think about it, it makes sense. When I go up an incline I really notice it. And it is like it should be downshifting but not. It still shifts out of first at 25 or so, but would a bad modulator keep it from downshifting back to first?
 
I was thinking that I had done that a long time ago. I seem to remember making that mistake once and had a huge back fire when it tried to start. I could be wrong or maybe it was a different engine but I thought it was a SBC.

It was worth a shot. Trying to diagnose over the internet is hard. :)

Worth pulling the cap and looking at the rotor and inside of the cap as well as checking the wires for correct ohmage and connections. Maybe a burned spot grounding out somewhere.






Carl
 
Here it is on my powerglide

feb1b1c46eb71e6cf1019b1976204b66-1.jpg

Just noticed this you said powerglide. I believe that is a turbo 400turbo400.JPGpowerglide.JPG


Not that it matters for how it is running.


Did you ever check the points?
 
Yeah. Not a powerglide. Definitely a 3 speed trubo hydramatic. Just not sure if it is a 350 or 400. Still learning

Replaced the modulator after getting the correct one for the Turbo. Went in easily. Shifts a lot better. But still drives rough and won't get over 50 unless going downhill. But much better than the other day. Also about 30 degrees colder today than Friday, so not sure if that matter. Hopefully this will help stop the leaking tranny fluid. If nothing else.

I have not checked the points yet. But do have an HEI to go in its place. Just haven't had the time or guts to swap it yet. Supposedly I need to change a wire to a thicker gauge when I do. And set the timing. Things that will test me a little and I would prefer to have someone with experience to help me with it. But it will be happening soonish. Especially if you guys think it could help.
 
HEI is the way to go. But in the mean time you should check the points.

I don't have time to explain the whole check/ adjustment process as I am off to U of M to see my dad. They put him in a new left lung Saturday. But here is a pic I scribbled the basics on.
POINTS.JPG
 
HEI is the way to go. But in the mean time you should check the points.

I don't have time to explain the whole check/ adjustment process as I am off to U of M to see my dad. They put him in a new left lung Saturday. But here is a pic I scribbled the basics on.
View attachment 56434

Thanks. And good lick with your dad.
 
Another option for the distributor is change out the points for a Pertronix electronic unit. The nice part is that you will not have to change your plug wires too. So have you checked the fuel pressure yet?
 
Another option for the distributor is change out the points for a Pertronix electronic unit. The nice part is that you will not have to change your plug wires too. So have you checked the fuel pressure yet?

I looked into the pertronix for my GTO years ago. I forgot about those. And no I have not checked the fuel pressure yet. But thanks. I will look into that. I also want to do a compression test.

Now I am going to show my ignorance. Regarding the wires, why do we need new wires for HEI? The gauge of the wire? When we did the new plugs, we installed new wires and they are supposedly OK to be used with the HEI. But I will double check. If we already have wires for the HEI, would it not do well with the old points distributor?
 
The points cap and HEI cap require different spark plug wire terminals.

Ok. Good to know. Thanks.

Other symptoms include that when you put the gas pedal to the floor the reaction is like there is no gas being fed.

And there is no way this car will spin tires or even go above 50 unless downhill.
 
Fuel pressure/fuel flow. Have you changed the fuel filter on the side of the Q-jet yet?

Sent from my SM-G920V
 
Fuel pressure/fuel flow. Have you changed the fuel filter on the side of the Q-jet yet?

Sent from my SM-G920V

Yes. I did that one. I am using one of those clear glass ones. And I see that it is full of rust now. I need to drop the tank for sure. The filter in there is probably crapped up as well.
 
If you want them, I have an old dwell meter and the tool to adjust the points when the car is running. I have no use for them currently. You can use them, if you want.
 
If you want them, I have an old dwell meter and the tool to adjust the points when the car is running. I have no use for them currently. You can use them, if you want.

Thanks John. Sure. Not sure how we can get it arranged, but I am driving through Richmond area for Thanksgiving at my parents place in Hampton.
 
Wow a dwell meter. Havnt seen one used in years. I use mine as wall art lol.

sent from my flaming samsung note7
 
Last edited:
Back
Top