- City
- Laurinburg
- State
- NC
Hi Gang,
Since my move to North Carolina in July, I have been using the Scrambler every day. It drives me to work at the University of North Carolina, hauls hay for our horses, pulls a mower to mow the pasture, and it has even pulled down a shed (with the help of a Warn 8274 winch). In short, it has been quite the working Jeep.... it is however, telling me it is time to rebuild the engine. I will be taking it offline to rebuild the engine and get it painted...
as
soon
as
Jeep
delivers
the
2015 JK Unlimited Hard Rock I ordered a week or so ago.
I honestly never thought I would be buying another new Jeep. New vehicles tend to be poor investments. This being said, I knew what I wanted and after looking around, I couldn't find it new on a lot or used anywhere in NC or SC. The primary specs were that it needed to be a manual transmission orange colored rubicon. Pickins were slim so I broke down and ordered directly from Jeep. The new ordering process at Jeep is pretty neat. You place the order and receive a Vehicle Order Number (VON) within a day from the dealer who is ordering it for you. In a day or so, Jeep assigns a VIN. Armed with the VIN and/or VON, you can call 1-877-IAMJEEP and receive updates on the status of your build. My JK Unlimited Hard Rock (JKUHR) has all the parts assembled and in stock for the build and is scheduled for build (code D1). Once Jeep starts putting it together, it takes only a day or two to build (in many, but not all cases).
With any luck, I will have the JKUHR in late December or early January, and will start taking the Scrambler apart. I have a great garage here in NC (standalone building with 20' ceilings, three bays and a workshop... just at 1,000 sq. ft.) and am really looking forward to pulling the engine and rebuilding it. While I am rebuilding the engine, I will take all the trim, fenders, grille, etc. and flatbed it to a shop to have the bodywork and paint done. I have no idea how to find a good shop. I had a good one in Arizona, but here in the sticks in NC, I am a bit worried about finding a good paint and body shop.
Anyway... just a quick update. Once the actual work on the Scrambler begins, I will update my original build thread with the details.
Joe
Since my move to North Carolina in July, I have been using the Scrambler every day. It drives me to work at the University of North Carolina, hauls hay for our horses, pulls a mower to mow the pasture, and it has even pulled down a shed (with the help of a Warn 8274 winch). In short, it has been quite the working Jeep.... it is however, telling me it is time to rebuild the engine. I will be taking it offline to rebuild the engine and get it painted...
as
soon
as
Jeep
delivers
the
2015 JK Unlimited Hard Rock I ordered a week or so ago.
I honestly never thought I would be buying another new Jeep. New vehicles tend to be poor investments. This being said, I knew what I wanted and after looking around, I couldn't find it new on a lot or used anywhere in NC or SC. The primary specs were that it needed to be a manual transmission orange colored rubicon. Pickins were slim so I broke down and ordered directly from Jeep. The new ordering process at Jeep is pretty neat. You place the order and receive a Vehicle Order Number (VON) within a day from the dealer who is ordering it for you. In a day or so, Jeep assigns a VIN. Armed with the VIN and/or VON, you can call 1-877-IAMJEEP and receive updates on the status of your build. My JK Unlimited Hard Rock (JKUHR) has all the parts assembled and in stock for the build and is scheduled for build (code D1). Once Jeep starts putting it together, it takes only a day or two to build (in many, but not all cases).
With any luck, I will have the JKUHR in late December or early January, and will start taking the Scrambler apart. I have a great garage here in NC (standalone building with 20' ceilings, three bays and a workshop... just at 1,000 sq. ft.) and am really looking forward to pulling the engine and rebuilding it. While I am rebuilding the engine, I will take all the trim, fenders, grille, etc. and flatbed it to a shop to have the bodywork and paint done. I have no idea how to find a good shop. I had a good one in Arizona, but here in the sticks in NC, I am a bit worried about finding a good paint and body shop.
Anyway... just a quick update. Once the actual work on the Scrambler begins, I will update my original build thread with the details.
Joe

).