• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Warn 8274 question

For the probably misguided attempt to lower the winch and allow more airflow to the radiator, and to do something "cool and different". However, I am realizing that if I were to do every "cool and different" thing that passed through my head, I'll never get to drive this thing. I'm at the point of trying to "fast-track" my build, so I can be driving this summer.

Seriously considering trading or selling my 8274. I think it will block too much airflow, especially with the 5.3, an A/C condenser, and a trans cooler.

Does this mean I can have the 8274 for $250 plus the o-rink kit?:crazy:
 
HAHAHAHAHAHA.....

That's a Corvair Spyder gauge set. You could probably sell that for $100 or so if everything works.

Joe

YEP,THE OLD MAN WHO OWNED IT DID THAT,TOOK ME AWHILE TO FIGURE OUT WHAT IT WAS , FOUND ALOT OF BONDO WHERE THE ORIG LIGHTS WHERE
HE EVEN CHAGED THE GUAGE CLUSTER !! NEAT HUH!! AND IT HAD A CHEVY 283 IN IT
attachment.php

\
attachment.php

attachment.php
 
Seriously considering trading or selling my 8274. I think it will block too much airflow, especially with the 5.3, an A/C condenser, and a trans cooler.

Keep the 8274. Airflow will NOT be a problem if your cooling system is correctly set-up. I have had my 8274 on the front of my CJs for over 10 years without any issues.
 
Does this mean I can have the 8274 for $250 plus the o-rink kit?:crazy:

I'll trade for a 9K, either integral or remote solenoids!

I'll probably wait to do anything until after my Scrambler is running, and i can see how the cooling system does.
 
Randy,

I haven't had a problem with the 8274 causing an airflow problem with either the chevy 350 that was in my jeep or the 4BT. A guy in our wheeling club did, but that was on a LR series truck where the whole grill area is only 20" or so wide.

You'll be fine. For what it's worth, you're not the only one who's thought of trying to lower the winch. The thought crossed my mind just for the sake of bringing the winch more in line with the frame rails for strength during pull reasons.
 
I've never had an airflow problem and I drive my Scrambler daily over the summer in 115+ temperature. I simply can't imagine that you would have an airflow issue if your radiator, water pump, fan clutch, thermostat, and fan are all in working condition. I do have a 3 core radiator and I've seen some 2 core radiators installed in Jeeps... that may be a factor keeping my Scrambler running cool.
 
My current radiator is a 2 row Northern aluminum unit. It was ok with the 350. But that was without the trans cooler and the A/C condenser. I think I'll just see how it runs first before I make any decisions. I sure like the simplicity of the 8274, and how the brake is external.
 
drove my Scrambler with 8274 through the Mojave desert last summer. never had any over heating issues.
 
One more thing comes to mind about why I like this winch....150' plus of cable or rope, enough to use a snatch block if nesessary
Also the brake is not in the drum like on the newer wiches which heats the drum up enough to be a problem if your using rope.

Just my :twocents:
 
Back
Top