• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What is this connector supposed to go to?

S

steveklentz

New member
City
Grand Junction
State
CO
Hi there,
I bought my ‘82 earlier this summer and I’m still getting to know it. Can anyone please tell me what this is suppose to go to?

thanks for the help!!!
Steven
1571105343820.jpeg
 
I don't recognize it. What are the wire colours - you may be able t figure it out from the wiring diagram.

http://oljeep.com/ is a most useful site.

I believe the looms had wiring for all models, it's probably an option you don't have. Although i don't know what would be in that area.
Do you have all the emission controls still attached?
 
Mancunian said:
I don't recognize it. What are the wire colours - you may be able t figure it out from the wiring diagram.

http://oljeep.com/ is a most useful site.

I believe the looms had wiring for all models, it's probably an option you don't have. Although i don't know what would be in that area.
Do you have all the emission controls still attached?
Click to expand...

Thanks for the info I will check it out. Most of the emissions have been removed I don’t have a/c either.
 
Curious if it's a CA emissions Jeep by chance? I don't recognize it either.
 
I have a 1982 factory service manual....PM me the wire colors and I can take a look.
 
Which gearbox do you have? just wondering if its the back up lamps switch connector?
 
I've got a CA A/C 83. Didn't see that connector, but mine has 3 others going no where in the same vicinity.

1571255010773.png
 
Steven,
Can you double check the wire colors and if the have a trace stripe?

I'm not seeing anything in the diagram for white and black in the same 2-pin connector...

I also checked my 82 and could not find the same connector, but hard to say what year my harness is, was installed by previous owner in a glass body.
 
Scott_P said:
Steven,
Can you double check the wire colors and if the have a trace stripe?

I'm not seeing anything in the diagram for white and black in the same 2-pin connector...

I also checked my 82 and could not find the same connector, but hard to say what year my harness is, was installed by previous owner in a glass body.
Click to expand...
Upon looking closer it’s a black wire and then white with black stripe
 
Steven,
I cannot find that particular connector in my FSM, but the white wire with the black trace is listed throughout the diagram as reverse light circuit. The solid black is typically a ground wire. You mentioned back-up lights not working....so I'm guessing you guessed it...

Sorry I cannot verify.
 
Scott_P said:
Steven,
I cannot find that particular connector in my FSM, but the white wire with the black trace is listed throughout the diagram as reverse light circuit. The solid black is typically a ground wire. You mentioned back-up lights not working....so I'm guessing you guessed it...

Sorry I cannot verify.
Click to expand...
Thanks for digging into that, I’ll check it out and see?
 
You must log in or register to reply here.
Back
Top