What's on your Work Bench?

[barrys]

We’re going to need a reloading section soon.

I have to figure out how to modify modern shotgun shells to fit my not so modern breach loading zulu shotgun I received for Christmas.

 

[mxracer919]

Most recent workbench picture I have. New jeep chassis.

 

[certifiablejeep]

Most recent workbench picture I have.

Transformer Jeep?

cb

 

[mxracer919]

Transformer Jeep?

cb

Sure is.......transforming my bank account! Since growing it’s been moved to the floor.

 

[GreatCJ8]

Well these were on my workbench for months, now they are installed and boy what an inexpensive detail that adds a nice touch!
The original dry rotted cracked ones came out easily and with fanagling, the new ones popped right onto the doors.

 

[Interceptor]

What's on my work bench?
Jeep Dash
Welding helmet
Stuff to start my seeds
Extention cord
Sheet to haul off leaves.

But I'm doing hot dogs

 

[timo439]

I like hot dogs..

Finally about ready to paint my battery/contactor box rack. Can you guess which hole I missed on. Commentary on my booger welds not required.

 

[Rosco1974]

I like hot dogs..

Finally about ready to paint my battery/contactor box rack. Can you guess which hole I missed on. Commentary on my booger welds not required.

View attachment 100284

Looks great!!!

 

[Belizeit]

It looks big. that will fit under the hood ?

 

[GreatCJ8]

Also swapped the speedo gear plug with the blockoff one since I have the Speedhut speedo with GPS.

View attachment 99939

I was going to ask about that.. Nice

 

[mhinchliffe]

Isn’t he doing the electric 8?

 

[mhinchliffe]

Giving it a Jolt

My plan is to use the existing radiator, an electric pump and the cooling plates within the battery boxes to cool. Same loop will be used for the controller. I gave @certifiablejeep the tank and am modifying the skid plate as the same for the rear battery box so unfortunately neither is available.

www.cj-8.com

 

[laffman]

Scrambler got a couple Woody's today.

 

[Interceptor]

Nice, same thing in my future. How long of a wait?

 

[laffman]

Nice, same thing in my future. How long of a wait?

Ordered Tuesday, got them Saturday.

 

[Interceptor]

Now thays fast

 

[spankrjs]

One the floor, but I tend to do a lot of work down here LOL!!!

 

[certifiablejeep]

A whole lot of parts taht have been taken off and need to be bagged and tagged.



cb

 

[mhinchliffe]

A small chunk of #3 rebar just out of the blast cabinet



A few sanding and finishing discs to try my hand at "artistic" metal surface finishing.......



And lastly, "minding my P's and Q's". If you don't know the origin of this saying, take a minute and search it up.




So if anyone here sees some #3 attached to something that has had some finishing disc work done to it and is stamped, post up the finished product if you will..........

 

[83CJ-8]

I can tell you what's "Not" on my workbench anymore.
-Taillights from a 1963 chevy pickup that I cut-in in "93" & switched to LED.
- Fuel relocation- filler neck for Jeep YJ, Filler Neck Bezel & fuel door for TJ.
- Rear 72-80 CJ side markers.