• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ-8 resin master build-up...step by step

Looks perfect Jeff! :thumbsup:
Cant thank you enough for all of your hard work and attention to detail on this . . . wait Ive said that 4 times already huh? LOL

I will more than likely say it 4 times again anyway.:D

Should I send $ now?

Later
Sean
 
Thanks! I'm glad everyone likes it!




No, not yet Sean...not even sure what these are going to cost yet :(

(Whiny voice I hear from the kids in the toy aisle) . . . But I waaaaaant one!:D

No rush Jeff these are worth the wait my friend.:thumbsup:

Later
Sean
 
Looking good. I sure hope I don't ruin it putting it together. Maybe you should offer an assembly service for dummies like me, so I don't screw it up. LOL.:D Probably worth the value of a rear main seal job at the dealer.:eek:

And the best part...


No Rust!!
 
Looking good. I sure hope I don't ruin it putting it together. Maybe you should offer an assembly service for dummies like me, so I don't screw it up. LOL.:D Probably worth the value of a rear main seal job at the dealer.:eek:


Don't worry Kevin, it's a pretty easy kit! If you haven't built a model in awhile, I recommend buying two CJ-7 kits, one to build & one donor for the resin Scrambler. You can't have too many Jeeps, right?

Since I could probably build the Scrambler in my sleep (dream or nightmare depending LOL), I may build some to order per owner's specs. I'll be starting a separate assembly thread soon as I'm going to use one of the test frames & build up a chassis, I can touch on any snags that come up during the build. :thumbsup:
 
Finishing up the little additional parts while the big stuff is in the hands of the caster...

Here's what the CJ-7 kit doors look like...upholstery just won't work for a CJ-8!

IMG_50582-1.jpg


used the top portion of a YJ door to make the basic door shell accurate:

IMG_50632-1.jpg


this is what I started with to form the roll-n-pleat door panel....nine sections of .125 styrene rod:

IMG_50612-1.jpg


this gets sanded down flat on the back side, cut to size, beveled & inserted into door panel along with scratchbuilt door pull & window crank:

IMG_50642-1.jpg


these door panels will be a separate piece to facilitate easy painting.

I'm meeting with the caster at the Toledo model/toy show on saturday, October 3rd to give him the last few parts & finalize things. Sorry this project is taking so long, but I think the wait will be worth it!

After I become a vendor here, these kits will be offered first to those who contacted me back in January thru eBay, then to those who have either posted or PM'd me about them. I also owe three kits to winners in the national's raffle.

I will not list any on eBay until all members here have had a chance to get theirs, as I appreciate all of the help you all have given me with pics, dimensions & encouragement throughout this long process! :thumbsup: The caster tells me the molds usually last for 30-40 crisp copies. I've got requests for around 55 copies so far, so it looks like he'll be making a second set.
 
Last edited:
Simply AMAZING....
Kind of like our own personal. "How do they do that"

thanks tons for sharing this journey with us Jeff!

:ZZZ:2w
 
WOW doesn't even cover it! Amazing!!!
 
Once again Jeff you have amazed me with your attention to detail and skill.
Cant wait for these to be ready!

Can I comission you to build a replica of my crawler? Im serious! LOL

Later
Sean
 
Thanks everyone! I'm looking forward to when you all have your kit in hand & get excited about building it! Winter is coming before you know it...Maybe Eric will start a new category for us..."resin scrambler builds" or the like :thumbsup:


Once again Jeff you have amazed me with your attention to detail and skill.
Cant wait for these to be ready!

Can I comission you to build a replica of my crawler? Im serious! LOL

Later
Sean

We'll talk Sean...I don't know when I'd find the time, but I'll gather the necessary parts for you to modify a kit into your rig. From what I've seen of your work, you're more than capable! Shoot me a PM with your rig's specifics...tires/size, drivetrain, etc. & I'll let you know what's available to match in the aftermarket or from existing kit parts.
 
Once you are a vendor, I think we could definitely set something up in the vendor forum for exactly that. Seems like the most logical place for it to help publicize these sweet kits! :thumbsup:

I know you need the CJ-7 kit to build one of these, have you thought about sourcing a pile of them and that way we can just get the full setup from you as a one-stop shop? At a minimum it seems like we ought to get a major group buy going on them for all of us that want one straight off... maybe you mentioned something like this, but I can't recall.
 
Yeah, I've thought about buying cases of Revell CJ-7 kits, but I haven't found a supplier willing to give me 40% off retail without being a dealer...these kits retail for $22.95. Hobby Lobby & Michaels stores offer 40% off coupons almost every week, so I think everyone buying their own kit will be the way to go.

Not sure about the group buy thing, they seem to put undue pressure on members to purchase within a specific time frame. I plan on discounting these to members here in some way, whether it be free shipping or a percentage off, not sure yet. I'll know more after I talk to my caster in person about costs...

I'm also going to inquire about costs of duplicating the R/H drive parts you all with postals & exports would need to make your Scrambler accurate. The dash & firewall will be easy to modify, I think the World Cab would be easy to build also. It's that $30/hr for mold making & duplication costs that's the killer :eek: I may be able to just make these parts myself on a per order basis, probably won't be much demand for these.
 
Last edited:
I've got some good news & some bad news after meeting with the resin caster...

Good news is he is working on these now...

Bad news is I won't be able to meet my original target price of $30-$40 per kit :( More to follow as I start receiving parts...

This is my fault as I went kinda crazy with detail & extra parts count trying to make the project as accurate & simple as possible for the builder, leaving them little to do in the way of scratchbuilding/modifying of parts. In doing so, that brought the mold-making & casting costs up accordingly :eek:

I'm going to make the all of the parts available separately for those of you that wish to stretch/modify your own Revell kit frame, or don't need a hardtop or seats, etc. if you're replicating yours with aftermarket seats or a soft top, etc. That will bring the price down for some that don't need all of the parts.

For those who have asked to be put on the "list", please feel no obligation to purchase if the final price is more than you want to spend, I understand! :)

Ahh, if I could just do the mold-making & casting myself :banghead:
 
Tub is being sent to the caster tomorrow...here's a last look in black primer. The next one you'll see will be white resin! :thumbsup:

IMG_45102.jpg


Here's one of my original reference pics I used...

CJ8Bottomrear.jpg


And my mock-up to see how close it looks to the 1:1 tub in pic...how'd I do???

tubbottom2.jpg

Bloody Poorly mate!!:shrug:













Where's the rust holes on the resin kit???:bow::bow::bow::bow::bow:
 
Back
Top