• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ-8 resin master build-up...step by step

John N said:
Looking real good...Now I'm interested.

Randyzzz said:
That looks perfect!:bow:

Thanks for the positive comments guys, I appreciate it!


fishinfool98 said:
Are you going to get these made and sell them???
if so put me down for 3

Yep...follow this thread & when it's completed, the resin caster is ready to go...I've got him on retainer :D
 
It's getting close now, gents! Here's a side profile with the flares temporarily attached...rear flare was built from two reprofiled fronts, grafted together. Did a quick chassis mock-up, with a spring over just to make it a bit more capable LOL ...wheels just to tease Randy :D All of the major stuff is done, now it's on to the details like adding the embossing to the bed floor, wheelwells, etc. Please, let me know if something doesn't look quite right, you guys have these at home, I'm just going by measurements & your pics! :bow:

attachment.php



Close up of rear flare...do the rear flares swap from side to side on the 1:1 Scrambler? Doesn't seem like they would in scale, front "leg" needs to be a bit longer than the rear...

attachment.php


And the front:

attachment.php
 
Last edited:
LOOKS AWSOME. I'll be glad when you get these in production, I sure want at least 2.

Don
 
Wow! That looks great! :bow:

I don't think the rear flares swap side to side.
 
That looks great! I'll have to find me some less blingin' rims though ;)

Is there something not installed at the front of the chassis? Seems like it ends a few too many scale inches early.
 
bigwalton said:
I'll have to find me some less blingin' rims though ;)
You know you love those rims...you're just jealous!:D

Besides...they're mine, anyways!:D

attachment.php
 
Talking about not matching...I think the resin Scrambler has more parts attached than mine does right now!:eek:
 
bigwalton said:
That looks great! I'll have to find me some less blingin' rims though ;)

Is there something not installed at the front of the chassis? Seems like it ends a few too many scale inches early.

Eric...only the bumper is missing off the front...don't the spring hangers reside at the end of the frame horns like that? As far as wheels go, the sky's the limit...just about any 1:1 rim has been produced in scale...I'll fix you up, I've got quite a parts box! Post a pic of the wheel you want for your mini-cj-8 & I'll see what I have...

Thanks everyone for the kudos, just want this to look like the real thing :thumbsup:
 
Last edited:
Here's a side-by-side comparison with under floor details started...ejector pin blobs removed, floor supports fabbed & installed, wheel tubs installed, & bed floor detail started. Lots more detail to add here, but it's a good start:

attachment.php


Beginning of bulkhead, made from .020" sheet styrene, folded & formed to shape:

attachment.php



And in place:

attachment.php


This bare white styrene sure is hard to get good pics of, I have to check with the caster & see if priming or painting the parts before he gets them is the way to go...sure would allow for better pics!
 
jeffs396 said:
Eric...only the bumper is missing off the front...don't the spring hangers reside at the end of the frame horns like that?

Not quite unless they were moved forward or the frame shortened a bit.

Here's a quick image I found, there's a couple inches of frame out there. No biggie though, with the bumper on I'm sure it's all good.
frontshack-1.jpg
 
For Accuracy...

You have the ribs in the CJ-7 floor, will you be adding those to the Scramble floor? Both came that way.
 
John N said:
You have the ribs in the CJ-7 floor, will you be adding those to the Scramble floor? Both came that way.

Yep, they'll be there, just like on my original master, only better!

attachment.php
 
me either lol looking forward to it. you gonna have stripes and stuff for the kit? in the stock colors... like the blue kit or something?
 
PetesCj-8 said:
Your doing some real nice work there. I cant wait to order one. :bow:

Thanks Pete!


blue_osiris1 said:
me either lol looking forward to it. you gonna have stripes and stuff for the kit? in the stock colors... like the blue kit or something?

No plans of decals as of yet...I hear at home decal making isn't that hard these days with computers, printers, & decal paper. I've never made my own. Maybe a company that makes 1:1 Scrambler decals could photo-reduce their graphics & sell them to us...like here:

http://www.phoenixgraphix.com/amc.htm#jeep
 
A request for one of you that has the factory half hardtop...could you measure the height of your back window & see if it's the same dimension as the windshield? Seems to work out that way on the model, want to be sure though, before I finalize the hardtop. Thanks in advance! :bow:
 
Hey Jeff be happy to help. Call me sat around 2 or 3 pm and I will get the measurements for you.

Later
Sean

PM'd you the #
 
Back
Top