Pretty good progress this weekend, even with the tropical storm.
Pictures are in order of how I did the work. No rhyme or reason on some things.
Cleaning up, polishing, lubing the OEM hood loop things:
Cleaning up some other stuff. Clean, tap threads, find hardware, etc.
Old ICM I plan on reusing, don't see this too often:
Installed the ICM. I still do not have the two brake lines that come off the proportioning valve and go up to the master cylinder. I dread installing things in this area because I know it will be no fun installing those two lines now.
Installed wiper arms and hood loops. Pretty sure the motor is at the "rest position". I never go by the measurements in the FSM, I adjust the arms where I want them at rest. Will probably have to adjust in the future. Again, easy work, just getting parts off the floor/bed.
Reassembling the power brake booster bracket/rod thing:
Picture of bracket to booster orientation:
Left the master cylinder off for now, easier to bolt up with less weight.