• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

An Australian CJ-8 Overlander in New Jersey: Preservation/Maintenance/Improvements

More Interior Work

I have been getting quite a bit done on the Overlander over the last two months, but just no time to post about it...so here is a quick update...

Been focusing on the interior cleaning up all the little bits like the floor shifter and putting the new front seats in, and restoring the seat belts. I also installed a factory console, which I had to trim to allow the floor mounted ebrake to work. It also sits further back then stock so that it doesnt interfere with the shifter when its in 1st gear.

Finally, I also added a set of OEM fog lights, but havent wired them yet.

Here are a few pics

Seat Belts before:


IMG_3526 by jerseyjeeps, on Flickr

Seat belts apart and sprayed the plastic housings with trim paint, followed by new decals. I found these on a forum from a guy in Mexico by searching for "TRW seatbelts" on google. The name TRW is stamped on them and "Made to Australian Spec ...." Turns out they are the same stickers that TRW belts in some early porsches use, and he reproduces them for those cars.


DSC06051 by jerseyjeeps, on Flickr


DSC06059 by jerseyjeeps, on Flickr



Console fitment near ebrake - its close, but it fits well. The trimming is just on the side to allow the mechanism to move when pulled, not the front or the back.


IMG_3317 by jerseyjeeps, on Flickr




DSC06152 by jerseyjeeps, on Flickr



IMG_3311 by jerseyjeeps, on Flickr



IMG_3299 by jerseyjeeps, on Flickr


And the Marchals...I am normally not a fan of these but on the Overlander with the protruding turn signals I think they do a good job taking the eye away from them :rolleyes:

Also, those turn signal lenses I replaced too, if you look back at the old pics you can see they were barely orange anymore.


IMG_3324 by jerseyjeeps, on Flickr

Next up is trying out some oem wheel choices, likely oem chromes, and installing the stealth power window kit and door repair on the LH side door. Oh, and I still need a nice original glove box door in Olympic white....whos got one? :wave:
 
This thread gives me wood. That shot of the front seats/dash is insane. :drool:
 
That is awesome!!! beautiful!
 
The Overlander looks fantastic:thumbsup:

Maybe this will motivate jeepaddict to do some work to his Overlander:shrug::fingerscrossed::rolleyes:
 
The Overlander looks fantastic:thumbsup:

Maybe this will motivate jeepaddict to do some work to his Overlander:shrug::fingerscrossed::rolleyes:


Hey you leave Jeepaddict alone he has plenty of Jeeps to worry about and we all only got two hands ya know..:rolleyes:

I actually got to see his Overlander a few weeks ago when I was passing from Miss to TX...pretty dang cool to see another one what a great score...we exchanged notes and worked a little on figuring out the interior lights. Since his didnt have a headliner in the way, I was able to see how the dual dome light set up works. We both are going to have them come on with the front switch instead of having them seperate with the back switch just controlling the rear. Mine is quite dim in there with just the front one so why not have them both come on with either switch. Turns out it will be a simple wiring change along the body edge, no headliner removal needed.

Thanks everyone above for the encouraging words. Those seats are some originals I have had some of them as long as 8-10 years, pulled out of passenger side completely rusted out CJs, all three came from different jeeps, and the rear came from Kayakgreen. The mats are NOS from FSJs, and because they are bigger, they fit the overlander better with the pedals on the RH side as CJ LHD ones would have the wrong pattern. I still want to do something about that silly A/C box and also put a factory radio in and restore the dash, but for Sandblast, I want my A/C and Good Tunes for the road trip...so that will be next winters project. I will retain the A/C but try a custom cut version of the unit used here in the US, custom to fit with the heater box, which is a mirror image of the one we have in US CJs and would interfere with a standard A/C unit.
 
She sure is looking good.The thing wiith that style of A/C is when you slam the d300 into low range,the shifter can rub or catch your fingers.I have seen the factory units installed out here.Would like to do that to mine one day.There are still some more overlanders here if the rest of you blokes want one:cheers:
 
Great looking Jeep. I would love to see it one day.

Karl
 
Last edited:
This is got to be the coolest cj8 the ever made.. Very nice. I hope you can make it to the national so I can check this thing out..lol
 
Hey you leave Jeepaddict alone he has plenty of Jeeps to worry about and we all only got two hands ya know..:rolleyes:

I actually got to see his Overlander a few weeks ago when I was passing from Miss to TX...pretty dang cool to see another one what a great score...we exchanged notes and worked a little on figuring out the interior lights. Since his didnt have a headliner in the way, I was able to see how the dual dome light set up works. We both are going to have them come on with the front switch instead of having them seperate with the back switch just controlling the rear. Mine is quite dim in there with just the front one so why not have them both come on with either switch. Turns out it will be a simple wiring change along the body edge, no headliner removal needed.


Somebody has to bust jeepaddict's balls:rotfl:

And you are correct, he has more then a "few" Jeeps to worry about, so many in fact that my yard has become his overflow storage yard:rotfl:

That's pretty cool you were able to use his Overlander to help figure some stuff out on yours:cheers: I just hope jeepaddict takes the time/$$ to clean/repair his Overlander to get it in as good as shape as yours:bow:
 
Looking great JJ. I'm thinking of just sending mine to CB for a resto...
 
Hey SKT thanks, most of the more recent stuff was captured in the Sandblast thread, But yeah you're right it's been a while since I've updated this thread. I've done a few things to it after completing the summer road trip which was an over 3000 km adventure for the return to Toledo story and Sandblast and the Bantam Heritage Festival then took it to a show with my mom in November now it's parked for the winter. Here are a few pics. I still have not done the left side power window addition , or the ac retrofit.

ImageUploadedByTapatalk1359780965.771032.jpg

ImageUploadedByTapatalk1359780981.176772.jpg

ImageUploadedByTapatalk1359781013.194993.jpg

ImageUploadedByTapatalk1359781182.243969.jpg
 
Last edited:
Did you ever get the drool stains I left all over that Jeep off? I love that Jeep.

Hows the distributor gasket holding up. :D
 
Back
Top