• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Can't Tell You How Bummed I AM....

ScramFam

Registered User
City
Nowhere
State
OH
I took my Jeep for a short trip today in between packing for our trip across the state for the Silver Lake Scrambler. Welp, I was stopped at a light and it died. I have fuel, no spark. I replaced the ignition module hoping that was what was wrong. No dice. Sooo... it looks like there will be no Jeep for the Scramble. I guess I'll still go, just to camp with the fam I guess...
 
Get to work Matt, it's probably just a loose wire.
 
Mine has done the same. Check the engine earth. I won't know till after i get my Carb back as I had to rebuild it!
 
Did you pull a all nighter? You gotsta get it fixed....you just gotsta...
 
Matt, I was thinking last night what it could be... bad ground does sound like a possibility. You said you were checking all the wiring though. I really thought the ignition module was going to be the culprit.

You said it cranks over fine right?

Have you got 12V on start-run at the distributor? If so, it's got to be a ground or something else in the dizzy. You should check the resistance/continuity between the body of the dizzy and the - post on the battery.

I'd grab a couple battery cables and star washers, just find bolts to connect motor-frame and frame-body. Did you make sure to keep/reconnect the big grounding strap from the motor to frame side of the mount when you swapped?

Do you have a fusible link in the battery feed? Can't see what would make it go bad just sitting at a light, but...

That's all I can think of. Good luck!
 
No Dice

Folks, I am soooooooo frustrated!!!! Spent a whole year, tons of $$$$ and tons of frustration trying to get it ready for this trip. I'm at my end. Packing the fam up and going camping. Look for a for sale sign in this rig when I'm done getting it running again. :banghead:
 
With a HEI, there is not a lot that can cause a no-spark issue. If it 's turning, it can only be the module, pick-up, wiring to the coil, the coil itself, and the button inside the cap. Obviously check to see that there is power to it during cranking and with the key on-
 
Yeah. This HEI's a real winner. I ran a test light between the hot and the ground wires. Looks like I have a good circuit. The only thing I can think is that something else fried up in it.

Packing up the kids in the car and we're going to make the best of it. I own this Jeep, it doesn't own me or my vacation!!!
 
If you already replaced the module, then the options now are less. You're down to just a few things. Hurry up.......:smokin:
 
The problem is the next step is ordering a new HEI -- another couple hundred dollars, not available locally.
 
Ditch that Mallory. Even when you get it running again you'll never trust it.

But you just can't sell it!
 
I'm going to send it back. They said they would repair it and return it to new. Not sure if I will run it or sell it at that point.
 
Results?

Ok Matt, man up and tell us what you found. :huh: :wave:
 
Oops!

Sorry :o, We were posting at the same time, :crazy:

Are you still runing the Mallory or did you switch to the HEI? :confused:
 
Matt- send the Mallory back and have it fixed, then sell it. Save up and buy a good HEI- I'd recommend a GM based unit that has an internal module and is basically a 1-wire distributor. With that style all you need is a good hot 12v wire with the key on, and she'll run like a top.

But you CAN'T CAN'T CAN'T sell the Scrambler!!!

Davis Unified Ignition is the company I'm thinking of...

forum
 
Matt- send the Mallory back and have it fixed, then sell it. Save up and buy a good HEI- I'd recommend a GM based unit that has an internal module and is basically a 1-wire distributor. With that style all you need is a good hot 12v wire with the key on, and she'll run like a top.

But you CAN'T CAN'T CAN'T sell the Scrambler!!!

Davis Unified Ignition is the company I'm thinking of...

40820.jpg

That's what I have and it's run great since day 1.
 
I agree also, but I do have both the DUI and a "Standard" HEI conversion distributor made by a friend. We ran both at our drag strip and there was <.025 differance in time slips. The "Standard" HEI can be bought for around half of a DUI.
 
You have good advice here from people MUCH more knowledgeable than me. But I'll toss this out there - Mine did something similar several years ago and after some searching it turned out to be a dead coil. Mine died in the road in front of a Jeep dealership (I have a 4.0 engine)! I had stopped to make a turn and it just died, it would turn over but not crank.
 
Back
Top