• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ-8 resin master build-up...step by step

jeffs396

mini Scrambler
City
NE
State
OH
Well, I've decided to start fresh on another master, rather than fix my mistakes on the one I built five years ago. Oh well, it'll make a nice shelf model anyway! Alright, if any of you would like to follow along & build your own, I'll try to cover everything from start to finish...

Here's the kit needed...these are readily available at hobby stores, eBay, mail order, etc.

attachment.php


the virgin tub:

attachment.php


underside:

attachment.php



Poll links for parts options...

Fender flare poll...https://www.cj-8.com/forum/showthread.php?t=22457

Rocker mouldings poll...https://www.cj-8.com/forum/showthread.php?t=22435

Seat poll...https://www.cj-8.com/forum/showthread.php?t=23621
 
Last edited:
cuttin' her up!

here's the top that will get cut to form half-cab:

attachment.php


here is the rear body tailgate frame cut away from body, main tub with rear floor cut away at floor step where bulkhead mounts, and front clip cut off...everything in between will get scratchbuilt. Weapon of choice for all of the cutting...razor saw!

attachment.php


Eric, here's what the molded taillight looks like finished...I don't think they'd look any better if removed, scratchbuilt, & attached during final assembly.

attachment.php



View attachment 12817

View attachment 12818

View attachment 12819
 
Last edited:
RandyLL said:
Does it have to be a Revel kit? The one I had was blue, made by Monogram.

Same kit, Randy. Monogram was the first to introduce the kit, Revell & Monogram merged in the 90s, changed the name to Revell-Monogram, then recently went back to just Revell. This kit has been reissued many times over the years, just remember when using a kit with molded-in color, sometimes the color of the plastic is hard to cover with paint. Always use an automotive primer after washing the plastic in soap & water. The resin that these bodies will be made from will require special prep before priming, I'll be including info with the kits. Also, superglue or epoxy will be required to assemble resin as styrene cements won't work.
 
This is fascinating to me....

I never could put models together worth a damn. I just don't have the patience for it I guess. I'd always end touching them while the paint was wet or something. Looks easy from here though...Good job
 
Cant wait to see how you address the CJ-7 emblem on the back near tailgate. I'd love it if you can make that into an 8 somehow, rather than remove it altogether.
 
sanderson9 said:
Cant wait to see how you address the CJ-7 emblem on the back near tailgate. I'd love it if you can make that into an 8 somehow, rather than remove it altogether.

Here you go...tiny armature wire from a friction car motor...that was a challenge! Dime in pic just for size comparison.

attachment.php
 
Well, decided to use yet another tub and leave the front clip in place this time...it'll make final assembly easier for the builder. Here's the tub with the new rear tub sides on. The rear wheel openings look like they may need to be enlarged a bit more to me...I'll check against pics. Sure wish I had one of these in the driveway to measure from! Don't worry, the side panel seam will disappear later. Anyone have their bulkhead removed so I could get a good pic of the side attachment of the bulkhead?

attachment.php


Here's a front fender with the molded-on flare removed...does anyone have their flares off to measure the width of the raised flare mounting area (for lack of a better term) so I can scratchbuild them for the body? Also, are they the same width on the front & the rear? In reference pics, they look to be about the width of the front fender side marker lights, but I'd like a measurement if I could get one (thanks in advance!:thumbsup:)

attachment.php


And here's a couple of pics for Randy...I found your wheels in my stash...

attachment.php


And one mounted...I'll have these cast also since they'll look good on musclecars & other trucks. The centercaps aren't smooth like yours, but could be made that way easily enough. They can also be sprayed with testors dullcoat to look more like aluminum, or I can have some left unplated for painting with metalizer paints later. Nice replicas though :thumbsup:

attachment.php


View attachment 13067

View attachment 13068

View attachment 13069

View attachment 13070
 
Those wheels are SWEET! The build looks good also. I can get some measurements and pics of the rear fender, if you want. I no longer have my stock fronts....:(
 
That would be cool if it's no trouble...is your flare off already? Hopefully someone's got a front fender with the flare off...
 
Ok, the camera was just sitting there, and so was I. :D Hope these help. The pic of the wheelwell measuring 23" was from the back on a straight line to the bottom of the opening. The tire is level with the bottom of the body so it made the other measurements easy.

attachment.php

attachment.php

attachment.php

attachment.php

This is from the back flat part of the tub to the rear of the wheelwell.
attachment.php
 
Last edited:
Some more...
attachment.php

This is from the bottom edge of the body up.
attachment.php

attachment.php

attachment.php

attachment.php
 
You take your hobby pretty serious...

That's pretty impressive work. I don't believe I put that much thought into rebuilding the real thing when I did mine....After reading your thread again, I'm reminded of that old movie flight of the phoenix.
I'm not picking by the way. I'm truly impressed by seeing someone that dedicated to detail. Personally I've always been more of a 'big picture' type of guy and have never had patience for that much detail, but I admire it in others....Good work....
 
Thanks for the kind words, Bill. I'm just trying to get the most accurate replica of a Scrambler that I can build. I want everyone to be as proud of their scale CJ-8 as their 1:1 Jeep. This stuff is like therapy to me, plus it doesn't cost much to work on unlike the real thing :eek: Progress pics soon!
 
Here's the reworked front fender including scribed panel lines...

attachment.php


and the rear wheel opening...


attachment.php
 
Looking real good...Now I'm interested.
 
Back
Top