• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

IAFFCJ 81 Scrambler

Seat brackets have been cut down welded and painted. Seats mounted and I think they might be in he right spot and not need sliders. Sat in her for a while helps with motivation want to drive.
B23BFEF4-B83C-4BEA-90E4-664076FD227C.jpg64022897-75A2-4190-AA4A-D55DB6445CDC.jpg
 
Getting the seats in means I can start on the console construction. Sidewinder shifter and atlas cable shifter are ordered and the cardboard mock up has started. Still need to work on heights but it’s coming along
4974E85E-AB4D-4EFE-80AA-ECCE2421B71D.jpg00C312A5-C6B0-4A76-83D1-536909894FE5.jpg
 
That dash looks awesome. And the console is gonna be sweet. Auto on the column? Where are the twin sticks coming up? In the console?
 
That dash looks awesome. And the console is gonna be sweet. Auto on the column? Where are the twin sticks coming up? In the console?

Thanks Dain. Your just going have to keep watching to find out.
 
Had some time today so I spent it cleaning up the garage the parts had taken over and I couldn't get to the benches anymore. Rearranged in the hope that I will stop losing parts. I am still waiting for the shifter I am going to use to arrive as the gate pattern I want is on back order but I did get a chance to rework the console design with the Advanced Adapters cable shifters and I think i have a pretty good idea where we are headed.
IMG_2317.jpg

Also got some paint on the front calipers so I can get the brake system all buttoned up, replaced the pinion seal on the front axle and filled it with some fluid.
IMG_2318.jpg

While filling the axle with gear oil i realized I did not have an allen wrench big enough for the plug. Well i have a welder so now I have a wrench.
IMG_2316(1).jpg
 
Have you checked out these guys? I'm considering going this route on mine.

https://www.powertraincontrolsoluti...fters/Push_Button_Shifter/All/hightolow/10/1/

No I hadn’t I’ve not seen these pretty interesting. Not for me but interesting concept. I disliked it when the fire trucks went to push button shifting.

Got a call today on my shifter and the rock crater gates are at the plaiter will have to wait a few weeks but that’s what I want so guess I’ll have to wait. Going with an art car sidewinder with a rock gate.
 
Didn’t have much time today but between errands and helping the neighbor with a dump run. I did have time to put the front calipers on and put a new set of rollers on the front axle. Went to the used tire shop and duh through the trash bin and found some that would hold air. Once I explained what I was doing the guys were very helpful with getting little tires on my big jeep. Hope to find a set for the back on Friday.
AB62D744-307D-428A-9B4B-4405ED60BA3F.jpg
 
I forgot that I also got my steering box packed up and shipped to West Texas Off-road for a rebuild and to be drilled and tapped for hydro assist steering.
 
Jake, the plates can be swapped out on these shifters. Mine was shipped with the wrong plate and they sent me the right one and I swapped it. Mine has the rock crawler one now.
 

Attachments

  • 20140824_184008.jpg
    20140824_184008.jpg
    32.5 KB · Views: 181
  • 20140809_192520.jpg
    20140809_192520.jpg
    33.4 KB · Views: 179
Didn’t have much time today but between errands and helping the neighbor with a dump run. I did have time to put the front calipers on and put a new set of rollers on the front axle. Went to the used tire shop and duh through the trash bin and found some that would hold air. Once I explained what I was doing the guys were very helpful with getting little tires on my big jeep. Hope to find a set for the back on Friday.
View attachment 60317

I believe your chances of tire rub are extremely low. :thumbsup: :wave:
 
Jake, the plates can be swapped out on these shifters. Mine was shipped with the wrong plate and they sent me the right one and I swapped it. Mine has the rock crawler one now.

That was suggested by the folks I ordered from but with the desired ones being where they are in production the difference in wait time wasn’t terrible and I have plenty of other stuff to work on so I stuck with the original order. If it was going to be much longer I would have gone standard and swapped it out later for sure.
 
So I am still waiting for the last shifter so I can get the console figured completely out and get things mounted and moving in the direction that will let this thing get moving. It was probably a blessing however. Dustin came up for a day last week and as I was in a fabrication stand still we worked on the wiring in the engine bay. while it may not look like much this is a huge progress picture for me. I hate wiring and now most of it is routed and ready in the engine bay. Huge thanks to Dustin for helping with this.
IMG_2364.jpg
IMG_2365.jpg

Also had my steering box come back from West Texas off-road from being drilled and tapped for hydro assist. This will go on soon i am sure being fabrication is something I would much rather do than wiring. More parts ordered today also to keep progress moving, have the parts that should complete the brake system coming so that will be nice.
 
A few years ago we introduced a 4 legged member to our family and it made for some distractions with the progress of the jeeps at the time. Well we are doing it again and i will have to try and fit in the training sessions and the jeep time every day. I has also changed the plans a little for the scrambler now I need room for 2 before we go to Sand Blast 11.

Meet Rajah coming home on 12/21/17
IMG_2329.jpg

And her clueless big brother Bosco
IMG_2326.jpg
 
A few years ago we introduced a 4 legged member to our family and it made for some distractions with the progress of the jeeps at the time. Well we are doing it again and i will have to try and fit in the training sessions and the jeep time every day. I has also changed the plans a little for the scrambler now I need room for 2 before we go to Sand Blast 11.

Meet Rajah coming home on 12/21/17
View attachment 60615

And her clueless big brother Bosco
View attachment 60616

Hi Rajah, and Bosco!

You are going to love the Jeep!!
Hank.jpg
 

Attachments

  • Hank.jpg
    Hank.jpg
    51.8 KB · Views: 113
Awww. Poor Bosco. He may be clueless, but he loved playing catch with daughter and I when I brought my Jeep over to load up before Nationals.
 
Got the call that my shifter is in and has been shipped. A few more days and it is time to knock out this console. I had a day to spend in the garage and tried to get some things that need to be done before the dash can go on finished up. Realized that the heater box was in pretty bad shape so apart came everything and cleaned up and painted. Needs all new cables which have been ordered also have a blazer fan motor and new heater core on the way. Should be able to put this together and install after Christmas. Brake lines also came in. I have a few ideas about finishing up the hard lines that will complete the brake system other than getting the hydro booster up and running. Trying to keep things moving forward.
IMG_2411.jpg

I also got my steering box back from West Texas Off-road all ready to plumb and get the ram mounts fabed up.
IMG_2405.jpg

Transmission cooler mounted and plumbed. Needs wired up and it should be good to go.
IMG_2407.jpg
 
Back
Top