- City
- Manassas
- State
- VA
BigWalton was asking about why I had to change plans with the cable shifter routing for the Atlas. Hopefully these pictures help explain it. As you can see above I am building a console for the Scrambler and the reason for this was to put everything within reach even when pinned back in the seat in a precarious position. Due to that final location of the shifters and buttons like the winch control and such were of more importance than the routing of cables to actually make it happen. Now that the console is very close to ready to go to paint I needed to be sure that i wasn't going to need to do something drastic to make everything work.
Original plan was to use the hole that is in the tunnel cover already to run the cables through. Turns out no chance that i would be able to make them make the turns using that hole so after some figuring i figured out where the cut the new hole. Nice sweeping bends now and the cables miss everything. They are close to transmission lines but I thing with some chafe protection we will be good to go. Now once console comes back from paint shifters can be hooked up and adjusted. Well adjustments may have to wait until it runs and moves but we are heading in the right direction.

Original plan was to use the hole that is in the tunnel cover already to run the cables through. Turns out no chance that i would be able to make them make the turns using that hole so after some figuring i figured out where the cut the new hole. Nice sweeping bends now and the cables miss everything. They are close to transmission lines but I thing with some chafe protection we will be good to go. Now once console comes back from paint shifters can be hooked up and adjusted. Well adjustments may have to wait until it runs and moves but we are heading in the right direction.









That power distribution panel is insane, awesome work!










BTW, you should get a -6 fitting for the hydroboost return fitting. That cleans things up a lot because all of the fittings on the hydroboost would all be -6.