You can run a TBI on really any engine as long as you have a source for the spark indicator (distributer on the GM engine provides this), a spread bore intake that you can put a TBI adapter to, and a fool pump with 15psi and a cam with 112+/- degrees of separation. You will need a vacuum source for the map sensor and someone to flash the computer for the things you don't have, i.e. egr, speed sensor, electronic transmission. Amazingly, they are extremely simple if left alone. You hook up the wires, add pressurized fuel and go. No waiting for the CTS to open up the choke, no worry with hooking up multiple vacuum lines to who knows what, and no stalling upside down! But I will say, once you install it, DON'T F with it! The TBI system is not very happy with a lot of changes. They don't like big cams, they don't like a lot of air...well, it will cost you to make it like those changes. Been there, done that. Now the good thing is if you wanted to go TPI (tuned port), it's the SAME computer and wiring scheme. The injectors bank fire meaning 4 squirt on one side at the same time, then the four on the other side squirt. Same tuning issues but can handle some air changes a bit easier due to the amount of fuel being delivered by each pulse. And it gets more complicated as you progress to the current engines that would require another posting to share the issues on.