• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Information Needed

mrachal

Basic User
City
Conroe
State
TX
Have any of you installed or had any dealings with installing a Throttle Body Injection on your Scrambler? I am looking to get away from my carburetor. I am looking at the Howell but would like to know what others have used and if you have had any problems.

Mike
 
Howell

I installed my fuel injection myself and i have not had any trouble with it at all. It is self explanatory and easy to install.
 
I have the Howell system on my 360. It's probably the best upgrade I've done. Easy to install.
 
I installed GM TBI on mine. Works good. I just searched google for information. Cost me about $100 and an old minibike frame.
 
Many of the guys out here in Kalifornia have replaced carbs with injection with all the smog laws and such. The Howell kit is very user friendly and works well. However, the Chrysler kit seems to have a bit more performance to it but it's more expensive. If you go with Chrysler be sure to match the ECM with the trans you have...standard or automatic.
 
I have considered going with a GM TBI from a junkyard. A very detailed set of instructions is availble from a link on the main page at www.bustedjeep.com. I actually have the computer, tbi, and wiring harness laid out on the floor of my garage since I was looking at what else I need and the level of effort required. It is just hard for me to go from the simplicity of the MC2100 to something complicated, especially when mine works so flawlessly so far. My concern would be how much more power and/or fuel savings I would get with the TBI.
 
There is nothing complicated to TBI. It's just a few parts connected by wires and a fuel line goes to one of them. The wiring is no more complicated than the mess of vacuum hoses on a stock engine.
 
ryankopecki said:
I installed GM TBI on mine. Works good. I just searched google for information. Cost me about $100 and an old minibike frame.

Do you have a GM TBI on your AMC 360? I was told by a mech that it was not possible. If this is true please enlighten me, I would love to put TBI on my 360.

Thanks, Bo
 
I installed an old analog Holley kit on my 74 304 CJ5, it was an easy install and worked very reliably for me once I got it tweaked in. A fellow club member has the Howell on his YJ and loves it, he also did it himself without issue
 
TXtrailbuggy said:
Do you have a GM TBI on your AMC 360? I was told by a mech that it was not possible. If this is true please enlighten me, I would love to put TBI on my 360.

Thanks, Bo
The Howell is a GM TBI with their wiring harness.
 
You can run a TBI on really any engine as long as you have a source for the spark indicator (distributer on the GM engine provides this), a spread bore intake that you can put a TBI adapter to, and a fool pump with 15psi and a cam with 112+/- degrees of separation. You will need a vacuum source for the map sensor and someone to flash the computer for the things you don't have, i.e. egr, speed sensor, electronic transmission. Amazingly, they are extremely simple if left alone. You hook up the wires, add pressurized fuel and go. No waiting for the CTS to open up the choke, no worry with hooking up multiple vacuum lines to who knows what, and no stalling upside down! But I will say, once you install it, DON'T F with it! The TBI system is not very happy with a lot of changes. They don't like big cams, they don't like a lot of air...well, it will cost you to make it like those changes. Been there, done that. Now the good thing is if you wanted to go TPI (tuned port), it's the SAME computer and wiring scheme. The injectors bank fire meaning 4 squirt on one side at the same time, then the four on the other side squirt. Same tuning issues but can handle some air changes a bit easier due to the amount of fuel being delivered by each pulse. And it gets more complicated as you progress to the current engines that would require another posting to share the issues on.
 
Do we have any dealers on here or know of anyone that may sell the Howell at a discount?

Mike
 
Im running a howell on mine we got together and did a group buy directly from howell if it hasn't changed you can still get them at dealer cost if you buy 5 or more kits at one time- I love mine some of the best money i spent-JC
 
mulescj8 said:
we got together and did a group buy directly from howell if it hasn't changed you can still get them at dealer cost if you buy 5 or more kits at one time- I love mine some of the best money i spent-JC
If there is enough interest, I would like to get into some dealer cost action on some Howell V8 AMC.
 
I would be interested if we can find enough people.
Would all of the units need to be for a V8

Mike Rachal
 
you can get them for whatever the only thing they told us it had to at least 5 units.......may want to check with them and see if they are still doing that and see what they will price them for
 
Mulescj8 does this make you a dealer?
If so would we still need to buy 5 units?

Mike Rachal
 
Back
Top