• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Jeep's are going to kill me yet.

Ted Wendel

Jeep nut
City
Richmond
State
VA
While cleaning my Dana 60 with a 4 1/2 inch grinder (I had a sanding disc on it) it hung up on something,and into my face it went,I think the glasses I had on saved my eyes,because they are scared up.My nose is swollen about twice it's normal size.

Tool-1.jpg
 
Sorry Ted, glad it's not worse. Most of my injuries have occured working on Jeep stuff in my shop.
 
O U C H
Ted,
I hope there is no long term problems... Thank you Jesus you didn't loose and eye or something worse..

quick recovery to you Ted
:ZZZ:2w
 
Yikes, thank God it wasn't worse! Grinders have scared me a couple times and seen too many things like this. Great tools, but they bite back and bite fast.

So sorry to hear (and see) this. Get better fast man.
 
Thats why we wear glasses to save our eyes!You get any stitches?

No stitches,Thank God.The cuts aren't as bad as they look,the one coming down beside my nose is more of a raspberry,the one near my eye socket is where my glasses got pushed in.
 
O U C H
Ted,
I hope there is no long term problems... Thank you Jesus you didn't loose and eye or something worse..

quick recovery to you Ted
:ZZZ:2w

Thanks,I'm a big ninny when it comes to medical stuff,so I definitely don't need any long term problems.
 
Yikes, thank God it wasn't worse! Grinders have scared me a couple times and seen too many things like this. Great tools, but they bite back and bite fast.

So sorry to hear (and see) this. Get better fast man.

Thanks
They bite back and bite back fast,may be the understatement of the year,I'm sanding a little rust off one second,a nano second later,I'm stumbling around like Rocky,after Mr T beat him in the first fight.I feel a lot better already,I'll probably do some type of Jeep work today.
At least I got my post count a little higher. :D
 
With your safety in mind I beleive I should come down there and remove any and all Jeep projects you have. Its in your best interest , and mine. :D Glad it wasnt worse. Take care. Bet you felt like this for a little>>>>>:crazy:
 
I had a cut-off wheel mounted to a 4 1/2" grinder that literally broke in half mid cut. Each half of the wheel went a different direction. I found the first half right away but not the second. About a week later I noticed a half circle shaped object stick in the sheet rock cieling of my shop (12' high!), it was the other half of the wheel. It was like someone threw a knife and it stuck in the cieling. I started using a full shield over my saftey glasses for cut-off wheel work after that.
 
With your safety in mind I beleive I should come down there and remove any and all Jeep projects you have. Its in your best interest , and mine. :D
That will work,as long as you bring them back finished :D
Glad it wasnt worse. Take care. Thanks I will.
Bet you felt like this for a little>>>>>:crazy:
YEP

Thanks
 
I had a cut-off wheel mounted to a 4 1/2" grinder that literally broke in half mid cut. Each half of the wheel went a different direction. I found the first half right away but not the second. About a week later I noticed a half circle shaped object stick in the sheet rock cieling of my shop (12' high!), it was the other half of the wheel. It was like someone threw a knife and it stuck in the cieling. I started using a full shield over my saftey glasses for cut-off wheel work after that.

I will be getting a full shield.
 
.... I started using a full shield over my saftey glasses for cut-off wheel work after that.

First off - Ted, glad you are ok!

Secondly, thanks for sharing the info. When I first started working on jeeps and doing some metal work, I didn't really pay too much attention to safety. Then I kept reading these horror threads on the Pirate site about accidents people have had, and I upped my safety standards quite a bit. Maybe your post will save somebody else further on up the road.

I will often use safety glasses plus a full face shield wihen grinding or cutting. Especially since many of the grinding discs and other materials are made in China and are known to break and shatter. I haven't had that problem yet, but you never know when it might happen, so it's better to be prepared.

Oh, yeah, and ALWAYS use hearing protection!!!!

-Mike
 
First off - Ted, glad you are ok!

Secondly, thanks for sharing the info. When I first started working on jeeps and doing some metal work, I didn't really pay too much attention to safety. Then I kept reading these horror threads on the Pirate site about accidents people have had, and I upped my safety standards quite a bit. Maybe your post will save somebody else further on up the road.

I will often use safety glasses plus a full face shield wihen grinding or cutting. Especially since many of the grinding discs and other materials are made in China and are known to break and shatter. I haven't had that problem yet, but you never know when it might happen, so it's better to be prepared.

Oh, yeah, and ALWAYS use hearing protection!!!!

-Mike

Thanks
I didn't even think of it,but you are right,if this will save anybody else from getting hurt,that would be good.
Get out of town,stuff made in China will break? :eek:
I hate buying anything made in China.
I probably would feel better,if you gave up that dumb old football game,and went to Oak Ridge :rolleyes:
 
...
I probably would feel better,if you gave up that dumb old football game,and went to Oak Ridge :rolleyes:

You probably wouldn't have gotten hurt if I had skipped that dumb old UVA vs. W&M football disaster, uhh...I mean football game... yesterday and helped you instead!
 
Wow...you were lucky. Thank God. A full face shield for grinding is a must. The time you have an accident is the time you think "It's just a quick zip and I'll be done". That's when disaster usually strikes.
 
You probably wouldn't have gotten hurt if I had skipped that dumb old UVA vs. W&M football disaster, uhh...I mean football game... yesterday and helped you instead!

I was talking about the football game you are going too,instead of going to Oak Ridge. :p
 
Back
Top