• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Mini project - oil bottle holder

CJeep

Scrambled
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Easton
State
CT
So, I'm only a little bit into my journey teaching myself to weld with a little flux-core machine. One of the main reasons was so I could fabricate and build things, not do real hardcore stuff, but I hope to work up to that.

Despite my best efforts and a new rear main seal, my 4.0 still uses a little bit of oil, so I like to have a quart bottle with me all of the time.

My Jeep did not have the jack when I bought it, but the mount was there. I removed it when I re-did the fender a ways back. Sometime last year, I realized with some modifications, it could make a decent quart bottle holder, out of the way and in otherwise unused space. Here is my journey as I heat & bend metal and do more than just practice welds for the first time.

FYI, my welds suck, the paint has runs from me trying to get the paint into all of the booger welds, and some of it that looks like runs is not, but rather is the remains of practice welds that I ground down (but show through the paint), since I made the strap with metal I hade been practicing on. So it looks like crap, but I don't care.

unnamed.jpg

PXL_20211114_212923057.jpg
PXL_20211218_162614015.jpg
PXL_20211218_162644494.jpg
PXL_20211218_163625515.jpg
PXL_20211218_163637531.jpg
 
That's how you learn, just do it, if bad to it over and learn. Good idea, nice Job.
 
That’ll work. Keep plugging away and you’ll see yourself improving every time you drop the hood.
 
Nice job! I like it!

Edit: Also, don't let the Insta-perfect side of things get you down. A weld does not need to look NASA spec; paint is just to keep the rust at bay. Booger welds and paint runs are part of the hobby when it's not your profession. So keep on keepin on and move on to the next cool project.
 
That’s a great idea!

I taught myself to weld years ago. I was lucky to have a mentor that let me watch him work but most of the hands on stuff was trial and error. I started out with a flux core machine. Of course, I wanted pretty welds, but I just couldn’t make it happen. They were plenty strong though. My mentor told me to convert my welder to gas shield. (Luckily mine could be converted.). That made all the difference in the world for me. Strength wise, my welds were the same but the gas shielded mig sure makes pretty welds. Long story short- if you can convert your machine to gas shielding you’ll be glad you did.
 
Back
Top