- City
- Easton
- State
- CT
So, I'm only a little bit into my journey teaching myself to weld with a little flux-core machine. One of the main reasons was so I could fabricate and build things, not do real hardcore stuff, but I hope to work up to that.
Despite my best efforts and a new rear main seal, my 4.0 still uses a little bit of oil, so I like to have a quart bottle with me all of the time.
My Jeep did not have the jack when I bought it, but the mount was there. I removed it when I re-did the fender a ways back. Sometime last year, I realized with some modifications, it could make a decent quart bottle holder, out of the way and in otherwise unused space. Here is my journey as I heat & bend metal and do more than just practice welds for the first time.
FYI, my welds suck, the paint has runs from me trying to get the paint into all of the booger welds, and some of it that looks like runs is not, but rather is the remains of practice welds that I ground down (but show through the paint), since I made the strap with metal I hade been practicing on. So it looks like crap, but I don't care.






Despite my best efforts and a new rear main seal, my 4.0 still uses a little bit of oil, so I like to have a quart bottle with me all of the time.
My Jeep did not have the jack when I bought it, but the mount was there. I removed it when I re-did the fender a ways back. Sometime last year, I realized with some modifications, it could make a decent quart bottle holder, out of the way and in otherwise unused space. Here is my journey as I heat & bend metal and do more than just practice welds for the first time.
FYI, my welds suck, the paint has runs from me trying to get the paint into all of the booger welds, and some of it that looks like runs is not, but rather is the remains of practice welds that I ground down (but show through the paint), since I made the strap with metal I hade been practicing on. So it looks like crap, but I don't care.






