
So it has been a while and what I did add got killed so I am bringing this back to life now that I am planning a swap to a tf 999 auto tyranny. I am assembling parts now and hope to do the swap over the winter. But a POS impala seems to be taking all of my cash.
I still need to get the knockdown linkage, the cooler and the lines. Oh and the driveshafts needed once done. Seems like I still need a lot. Ugh.
Are you wanting stock kick down linkage? If so I have probably 90% of it sitting in my garage. Let me know.

There aren't any cheap 258's around you? I bought a used 258 with good compression a few years ago for $150, sold the A/C compressor, alternator, and bracket, the BBD, and the air cleaner off of it for $140, have a $10 motor.
I figure if I ever need an engine I can swap it in quickly, then rebuild my old motor on the stand, taking my time doing so.
Lupo doesn't have an extra motor around for sale?
This would be the only way that I'd do another 258, but it doesn't sit all that well with me given that you DD this. You could plan on rebuilding the spare to have ready for the next time or to swap back in when it's rebuilt, then hold onto the "good used" one as your spare. You could do this to get it running and then spend your money on an add-on EFI kit.
I have a 258 with 75,000 sitting in a rust pile of a jeep that runs 2 hours away from you. We could drive it around but there's really no floor for the seat to sit on 
I have a 258 with 75,000 sitting in a rust pile of a jeep that runs 2 hours away from you. We could drive it around but there's really no floor for the seat to sit on
![]()
Flinstone donor CJ FTW!I have a 258 with 75,000 sitting in a rust pile of a jeep that runs 2 hours away from you. We could drive it around but there's really no floor for the seat to sit on
![]()





Or you could be like me and think & contemplate about it for years![]()