• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

My wife bought me a Jeep!

So, I got a rebuilt ECM and it started up and ran. But it was intermittent and would hesitate/backfire and quit if I wasn’t really gentle with the throttle or if I let it coast. Then the acc belt started slipping - consistently. I tightened up the idler pulley and got the flash light out to take a good look at everything. I noticed the new HESCO crank sensor on the harmonic balancer was “clean” on one side. I’m pretty sure the lose belt was causing the slack to move laterally and make contact with the sensor as the crank pulley slowed down throwing the sensor out of wack. Once the belt was tight, I started it back up and I could not make it stutter or hesitate. So, I may be out of the woods. Going to put some miles on it this afternoon and see if I don’t get stranded somewhere…
 
It will sit and idle all day. Goose the throttle, no prob. It goes out when it coasts... as weird as that sounds and it's the computer shutting me down. I have to wait 30 sec or so for it to do it's little reset. Then fire it up and the engine comes on happy as a clam. But if I don't wait the 30 sec it just cranks and will not fire.
 
That is strange. No idea but sure curious as to the cause.
 
Back
Top