mattymajors
CJ-8 Member
- City
- Spring Creek
- State
- NV
So, I got a rebuilt ECM and it started up and ran. But it was intermittent and would hesitate/backfire and quit if I wasn’t really gentle with the throttle or if I let it coast. Then the acc belt started slipping - consistently. I tightened up the idler pulley and got the flash light out to take a good look at everything. I noticed the new HESCO crank sensor on the harmonic balancer was “clean” on one side. I’m pretty sure the lose belt was causing the slack to move laterally and make contact with the sensor as the crank pulley slowed down throwing the sensor out of wack. Once the belt was tight, I started it back up and I could not make it stutter or hesitate. So, I may be out of the woods. Going to put some miles on it this afternoon and see if I don’t get stranded somewhere…
