• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New Member, hello

9T4YJ

Member
City
Lake Orion
State
MI
Hey, long time Jeep driver. I joined here looking for Scrambler related stuff. Rudy from that CJ place in Findlay Ohio said I should look here.

I bought a YJ from my wife's cousin back in 2013. He got it from his father in-law (first owner) and was letting it just sit and rot in his driveway/garage. I rescued it and brought it back to life. It's gone through several changes over the years, and I even took it to Moab a couple times now.

Most recently I cut it in half and added 10 inches to the wheelbase, then 14.5" behind the bumper, essentially turning it into a Scrambler tribute (?)... The long wheelbase YJ was a real thing, but was apparently only marketed to South America. I can't seem to find my early pics, but here's the current build state:
20211205_165617.jpg

I have a build thread on wrangler forum if you want to check that part out. I don't know if I'd be able to post that many pictures here, I hope it's okay to give a link, I'll go ahead and post now and then just beg for forgiveness later if I F'd up:
 
Hey, long time Jeep driver. I joined here looking for Scrambler related stuff. Rudy from that CJ place in Findlay Ohio said I should look here.

I bought a YJ from my wife's cousin back in 2013. He got it from his father in-law (first owner) and was letting it just sit and rot in his driveway/garage. I rescued it and brought it back to life. It's gone through several changes over the years, and I even took it to Moab a couple times now.

Most recently I cut it in half and added 10 inches to the wheelbase, then 14.5" behind the bumper, essentially turning it into a Scrambler tribute (?)... The long wheelbase YJ was a real thing, but was apparently only marketed to South America. I can't seem to find my early pics, but here's the current build state:
View attachment 99085

I have a build thread on wrangler forum if you want to check that part out. I don't know if I'd be able to post that many pictures here, I hope it's okay to give a link, I'll go ahead and post now and then just beg for forgiveness later if I F'd up:
You’re fine. Welcome!
 
Welcome from a fellow Michigander. It looks pretty good to me. What are those things on the hood? Lets see some pics of the inside bed area. Are you still rockin the YJ sport (roll) bar, or custom setup? Stock drivetrain?
 
Last edited:
Welcome if you have pictures of the build, start a thread for it and let it rip. Bunch of us have other Jeeps and like to see what otherd have done.
 
Thats an impressive amount of working out to do that mod. Bet you get a few funny looks.
 
Hi all, thanks for the kind words. I linked the wrangler forum build thread if you want to see more. I'll see about putting a thread for it over here soon.

The hood has a couple vents to help air flow. Quadratec has them if you like them. That's something on the list for future changes eventually.

Powertrain is still mostly stock 4.0L and AX15. I've upgraded the clutch to a Centerforce 2, and when I originally lifted it, I installed an SYE. Transfercase has been upgraded to a yoke from a TJ to get rid of the stupid u-joint straps. Running a Ford 8.8 in the rear, G2 Dana 44 in the front, 5.13 gears. Eventually I'd kind of like to do a stroker build on the engine.

I'll give a preview of the bed while in construction... The bed is using the standard YJ floor in the front, and is extended using a YJ floor skin strategically cut and lap jointed. The extension is supported with a CJ-8 reproduction rear floor support. The body mounts in it had to be pushed out 3/4" on each side to fit the YJ. I used CJ-8 replacement panels to do the bed sides and outer floor area. The rear corner supports are custom made from the YJ wheel housings so I could mount the YJ tailgate. I left the YJ family roll cage in, I haven't tied it into the bed floor yet, I have decided exactly what I want to do with it. It's right at the back of the wheel well as it starts to slope down.
20211124_180000.jpg
 
Well done! I know the square lights get a bad rap, but I have a soft spot for YJ's as my first Jeep was an '89 YJ.
 
I'm not crazy about square lights, but I'm more or less neutral on them. At least Jeep was trying to add a little flavor into it, mix things up a little, and it just didn't go over that well with some folks. Some people have put CJ headlights on, but the shape of the hood and grill just doesn't allow it to be grafted on very pleasantly. Spacing never looks right to me. There's of course the route of putting a CJ7 clip on, but that's a silly amount of work just to have the "right" lights. At least with a Scrambler conversion, I'm getting useful bed space, which was ultimately my goal. I have kids, and my wife doesn't know the meaning of "pack light". A weekend to Frankenmuth is like trying to move.

When I got the silly idea to do this, I was thinking of putting "SCRAMBLED" on the hood with a classic scrambler double strip down the side. So far I haven't found a decal place that would make it. With the bed liner paint though, a decal probably wouldn't work, it'd need to be painted on. I'm not sure how well that would work either, the bed liner surface isn't easily masked.
 
Welcome! That’s some nice fab work!
 
Back
Top