• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What did you do with your Scrambler today? April 2014 version

Status
Not open for further replies.

opelgtboy

Legacy Registered User
City
Glassboro
State
NJ
I guess I can start April's thread?

I finally put on the soft doors that i have had for 4 years and the new dash pad I have had for a year.

0401141556.jpg0401141557.jpg

Karl
 
250k0tx-1.jpg


I received the hard top for the YJ8
 
I pulled one of the rear axle shafts for a new seal and bearing set. Got it all cleaned up, old stuff off and ready to press on the new stuff tomorrow at a friend's house.

Trying to clean up these maintence items before Moab.
 
Get to start off a new month with bad news:

I must have not fully tightened the lugnuts on the front right corner. One of my nice, new tires decided to part ways with the Jeep, luckily on a dirt backroad not going too fast. But snapped the balljoints, tie rod and trashed the rotor/caliper. No other vehicles involved thankfully. Got it towed back home in the driveway now.

Phone is dead with pics, been a very long day, will post them tomorrow.

:banhead::angry::banghead:
 
dammit BW... sorry to hear.

Not Scrambler... got a power supply off of ebay.



Need to pick up a couple connectors tomorrow since I ran out. Here it is almost done. The left turn signal is not cooperating. :banghead:

 
Get to start off a new month with bad news:

I must have not fully tightened the lugnuts on the front right corner. One of my nice, new tires decided to part ways with the Jeep, luckily on a dirt backroad not going too fast. But snapped the balljoints, tie rod and trashed the rotor/caliper. No other vehicles involved thankfully. Got it towed back home in the driveway now.

Phone is dead with pics, been a very long day, will post them tomorrow.

:banhead::angry::banghead:

Wow! Glad you didn't get hurt....sorry about the damage.
 
Finished the tail section of my painless today. I was surprised about a couple of things, first one was that the painless had rear marker lights built into it (actual socket with a bulb on an 18 in pigtail separate from the tail connector. Did any CJs actually have separate tail markers?

Second surprise was that the painless connector for the tails isn't the 3 pin oem style connector but weather a 4 pin weatherpack(they added a ground). I like the weatherpack connector just fine, but it doesn't fit thru the hole in the body. I got it spliced in, but I was surprised they changed the number of wires and type of connector, only thing I could think of was to make it easier for the fiberglass body guys.
 
Sorry to hear Big Walton, hope you get it fixed ASAP:fingerscrossed::fingerscrossed: I almost had the same thing happen to me once, I was wondering why the steering felt loose, pulled into the garage, all the lug nuts on one front tire were missing:eek:

Prepping for Chocoloco ORV this weekend, depending on weather, and more shake down runs before the big cross country trip, so I drove this one to work today:wave:

IMAG3227_zps57af3037-1.jpg
 
Get to start off a new month with bad news:

I must have not fully tightened the lugnuts on the front right corner. One of my nice, new tires decided to part ways with the Jeep, luckily on a dirt backroad not going too fast. But snapped the balljoints, tie rod and trashed the rotor/caliper. No other vehicles involved thankfully. Got it towed back home in the driveway now.

Phone is dead with pics, been a very long day, will post them tomorrow.

:banhead::angry::banghead:

Holy Cow! I am glad you are OK and not cruising down the highway. My family bought me a torque wrench for Christmas and will be using that for a variety of uses, some of them lug nuts. :)

I have never had a wheel come off, but have had a ball joint catastrophically break. The front of my 76 Buick Skyhawk suddenly ground into the pavement and luckly no one slammed into me from behind.

Glad you are OK. Might be a good time to upgrade to larger disks or a fresh axle! (make hay when the sun shines!)
 
set up an appointment to have new glass installed in the freshly painted windsheild frame next Monday. I will mount the frame afterwards. Fingers crossed they don't scratch the paint.

EDIT: they have a new policy that they will not install the glass with the frame off the vehicle... weird. Maybe I will just buy the windsheild myself and try the install.
 
Last edited:
I am interpreting from this pic that this was an April scrambler fools day thing?

Maybe the whole wheel flying off was an April Fool's joke on us. I am hoping so. If not, sorry to hear that Eric. But love the new ride.


Dain
 
Lol. Guess I wasn't obvious enough with my April Fools admission. I made sure to point out that no one was hurt so y'all wouldn't worry too much and just chalk it up to my lack of mechanical skill.

So yes, April Fools. The picture I posted was used by JP magazine in their April Fools issue a couple years back.
 
I did not think you would leave the lug nuts loose. ..... But yeah I fell for it. I did not even remember April Fools until today.


Dain
 
Status
Not open for further replies.
Back
Top