• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

What did you do with your Scrambler today? November 2013 version

Status
Not open for further replies.
Heading to Louisiana this weekend, so I got some new "Goo-Slinger" installed on this one last night:thumbsup:

IMAG2447_zpscf4f3392-1.jpg
 
Took the morning to carefully put the top and doors on. Much easier on 65 degree day in November than 10 degree day in January. Broke a zipper tab, need to get a repair piece. Amazed how much the top pulls the windshield back into the doors.

Finally got the fuse box secured!!!
 
Installed motor mounts, transmission mounts, new rubber gas line, & a fuel pump.

All were original & gas line had cracks everywhere, couldn't believe it still held gas, even had a 10mm hole right by fuel pump.

Someone had installed the transmission mount stud/bushings wrong, so I'm glad I got it right!!!

Fuel pump worked fine, but I found out where the random knocking was coming from!!!!

Motor mounts were old & definitely were due to be replaced!!!!

Radiator hoses & heater hoses next!!!!!! Going to do thermostat too!! :)
 
Washed the half cab i have managed to find, thought it was white painted black but it seems its the other way round.
At least now i can repair the damaged part .
Anyone know the differences between the early and later tops i dont know what this one is?

20131117_134134.jpg
 
Washed the half cab i have managed to find, thought it was white painted black but it seems its the other way round.
At least now i can repair the damaged part .
Anyone know the differences between the early and later tops i dont know what this one is?

View attachment 38133

The early tops didn't have holes for the seat belt shoulder harness anchor point, the late did.
It looks like yours may have holes, but can't tell if they are factory by the pic. Follow the link in a previous posting with dimensions for the window opening that will confirm which top you have.


"Yes, the rear glass is larger (wider) on the early tops.
Check out the links to the CRLaurence slider site. The dimensions are given under "Additional Product Information"

'81 - March '83:
http://www.crlaurence.com/crlapps/showline/offerpage.aspx?ProductID=3271&GroupID=1651&History =30587:21770:1336:21770:1351:1389&ModelID=1651&pom =0

March '83 - '86
http://www.crlaurence.com/crlapps/showline/offerpage.aspx?ProductID=3272&GroupID=1652&History =30587:21770:1336:21770:1351:1389&ModelID=1652&pom =0"
 
It has indents where the seatbelt mounting holes could be but wasn't sure if all the tops had them?
The hole measures 1200mm x 450mm at its widest points, so i am guessing its a later one if there is a 12-13mm gap allowance for the rubber and the seat belt fixings have just not been drilled out?
No extra fixings on the sides either which i have seen on some.
 
Got the tank re-installed, new plugs, new plug wires, new fuel filter and got her fired back up and running. My son and I could not resist a couple block run in the neighborhood. Need to adjust clutch, brakes and pull trans and diff covers. Since she is now running I do have the 1st leak. Going to pull the radiator and get it tanked as well. We had a blast.
 
Taking a little break from wrenching to enjoying driving the Scrambler (nice time of year in TX for driving topless)...and starting the design of our offroad trailer.

The "donor" trailer was my smoker which has been on loan to the local rugby club I've coached off and on for the past 20 years. Luckily the leg welds broke on the way home so one less thing I have to cut loose. I'll post pics as I go in a new thread...and will be keeping and eye oufor a good used roof top tent here shortly.

1074393_10151873511739888_281114865_o.jpg


forum
 
The "donor" trailer was my smoker which has been on loan to the local rugby club I've coached off and on for the past 20 years.
1462601_10151873511914888_2122205801_o.jpg

Wow! I knew that rugby was a tough sport, but you actually make the team ride around in a utility trailer?!?!
:eek:
 
Worked on LJ yesterday and today...

yesterday, I installed these gauges. I dont trust the factory gauges.



Today I was working on the remote start. Its not done, hope to finish it tomorrow.

 
Took her to the cinder pit to send some more lead downrange. Gotta keep in practice!

And...it was 5 degrees here this morning....BRRRRR!
 
Got it ready-er for winter. Scrubbed down the ratty half hardtop first. This top has apparently been painted inside with what I can only describe as sorta-paint. It sorta stuck and sorta peeled. When I first brought it home (in a thunderstorm, with no muffler, barely enough fuel and no fuel gauge, no charging system and the top and doors rattling so bad that I told my buddy to back off a little in case the top blew off) my wife asked me if it was snowing. Odd since it was summer... The paint was just flaking off with every bump. I took a stiff nylon brush and some soapy water and removed all of the loose paint and the mud from a long forgotten playday with the previous owner. I had to take the metal strip off and put it on the Fiberglas windshield frame with bolts and nuts due to most of the holes now being in the shape of slots from the loose sub-par installation before. I knew the doors and top had a pretty decent gap and that I should re-align the doors. I also knew that there was no way I was getting the bolts loose on the doors without a torch, and that I'd probably still end up stripping the head or breaking at least a couple of them off in the door. So, Lowes weatherstripping to the rescue. It actually sticks really well and completely sealed the doors to the top. Done.

I screwed the rubber boots down for the transmission and twin sticks and got rid of a TON of air coming up through the trans tunnel.

I stopped by a little muffler shop in the hood a few days ago and bought a used $20 Delta 50 series Flowmaster just to see how it sounded. I think I like it. It's not too loud at idle but has a little rumble when the skinny pedal gets pushed.

I had a slow leak on one my tires. I found a plug that had a leak so I pulled it and replaced with a better quality plug. The one I pulled almost came out in ribbons. I've never seen that before. No leak after 48 hours.

I drove it to work yesterday after dropping my five year old off at preschool. She loves riding in the Jeep. It drives good, steers good, stops good and idles good. All improvements over when I brought it home.

It has good heat, but I need to investigate a pretty substantial amount of air coming in under the dash. It feels like its coming from above and to the right of the steering column...

As for now, I'm just gonna drive it some.
 
Installed G2 1 piece axles in my Scrambler today!! Definitely an upgrade over factory!!!


Sent from my iPhone
 
Ordered the parts I need to get my new fuel lines made. Should be here after Turkey day
. One step closer.
 
Status
Not open for further replies.
Back
Top