
Nice idea!Google "stealth HEI"
I agree, HEI module is the way to go, and doing the stealth HEI allows the original appearance, mounting location, and plugs.
You're right. #WWBWD? Now we're trending... Great idea about the stickers and shirts!
I know everyone is all about some HEI in this thread but has anybody opted for the TeamRush + CDI instead? I picked up a Summitt CDI module and am in the process of buying the new cap, cap adaptor, and button. I'll probably go ahead and throw an MSD blaster coil on there, too.

I looked hard at both and decided in the end that three was no real difference in performance either way but the HEI is literally one wire and therefore cleans up better under the hood. Only difference I could find and used that to break the tie for my thinking.![]()
I keep spare ICM's in each vehicle


Pretty interesting read:
http://www.ifsja.org/forums/vb/showthread.php?t=19440
I have HEI in the TBI 350 Tan Scrambler and Duraspark in the 258 Green Scrambler. They both have components that will fail, and leave you strandedI keep spare ICM's in each vehicle
My Green Scrambler, that has the stock feed back Carter and stock Durapark runs fine. The factory ICM finally melted a few months back.
I got bored, so I ordered up the "Team Rush" parts from Advance Auto today, will do the deed this weekend, and report back. I am going to install (with Advance Auto part #'s):
1) Distributor Cap - C193
2) Rotor - D219
3) Cap Adapter - C193AP
4) Plug wires - WR4050
5) MSD Blaster 2F coil - 8205
Not exactly "cheap", about $150.00
I like the idea of installing the MSD 6A ignition, it would probably be a good investment, but more $. Maybe in the future
I like how you can wire up the MSD, and leave the stock components in place. With a few simple plugs, you can swap back to the stock set up, if the MSD ever fails![]()
Jeephammer on the jeepforum would say different, but as you say there probably won't be any real difference. HEI seems like the better choice for those of us that just want to turn the key and go.
I like how you can wire up the MSD, and leave the stock components in place. With a few simple plugs, you can swap back to the stock set up, if the MSD ever fails![]()
leave all that there and add more to the engine bay? I like spares for what I have vs entirely different setups and requiring more potential spares.
Plus, my Scrambler will never see any extreme conditions like water crossings or bouncing around on rocks.