• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

First scrambler build!

We found that the captive nuts in the windshield frames m, two of same brand, made us yip in both my CJ10 and the CJ8. We ended up forcing things and just generally having an uncool time of it. You'll be fine.
 
Well it's a no go on the windshield frame. The aftermarket was a not a good fit and was all dented up....
I think the fenders will be fine. They lined up fine and will require very little prep to clean up some small dings and bends.
I'm going to post some pictures of my original windshield frame to get some feedback on using it or not.


 
c014358fdc65b1b8ee44fbde733dbbeb-1.jpg
7d8eb63725889fc681f84e6f57d17e0a-1.jpg
267c446d94be6691b7cb99fe2848c840-1.jpg
f80ceb7b4b36ca3cc0ffc5673b6a1a7d-1.jpg
e16dfeae83ff924dcd52232b325c7b67-1.jpg
36fa14125a36e839072ebf507204c211-1.jpg
29954534d255aba58b894a69daef1d9a-1.jpg
4cc3231c05efbefc7259adfd87f3d25b-1.jpg



912e9ef33b0348efaac125462cd9c220-1.jpg
 
I wouldn't use it on anything that you would want to have for a long term. You'll never get the rust that's inside the seams where the windshield gasket sits. Also for every bit of rust you see on the outside you will have more than double that on the inside. I imagine you can find original windshields in better condition, you'll have to look for them and expect to pay a bit for them. That would still be cheaper than the time to try to repair that one only to have it popping rust in a few years. Then you'll still have to find another and go through the process of painting, glass and gasket install.
 
Anyone have experience with jeepglass.com ? Looks like it could possibly be a better quality piece than some of the others. $399 for complete windshield frame and glass


 
Was the one you just got that wasn't good a 2 rib or 1 rib? I have seen a 1 rib out there that appears better but haven't held one in my hands. The one from jeepglass the value to me is for those folks who don't want to call on a glass guy or need something ready to go bolt on...but for your application wont you have to take the glass out and paint the frame with the body/etc?
 
etc meaning your fenders, hood etc...I now recall that the body is already painted :smokin:
 
There's a guy named Jay Newsome in Statesboro Georgia who sells/sold Jeep parts. I've used him before with good results. Don't know if others have used him or if he's in business still. Jeepsalvage or Salvagejeep was name of company. May have a clean original frame. Just a thought. Had a field full of CJ's.
 
There's also a guy on the Eastern NC Craig's list that has a ton of parts. Also one in asheville NC for$75
 
Thanks guys..couldn't find the one on craigslist in Asheville. I found the salvage jeep place online and will give him a call later today


 
fdf1a27efda9ecb31c8bdde39ae1c6a8-1.jpg

Getting pieces back from paint...slowly but surely. Already have pedal assemblies and heat/defrost system installed so I'm ready for my dash and wiring. Supposed to get snow tonight so looks like I'll be in the shop tomorrow


 
Anyone ever attempted to remove the glass from the speedometer to clean it? Wanting to use the factory speedometer but it would look much better if all the dust was cleaned under the glass. I was tempted to pry the sides up but figured I'd ask before I attempted it


 
As long as you are taking the cluster apart, if the needles are faded, good time to re-paint them. You can find red flourescent instrument paint on ebay for $8.
 
Anyone ever attempted to remove the glass from the speedometer to clean it? Wanting to use the factory speedometer but it would look much better if all the dust was cleaned under the glass. I was tempted to pry the sides up but figured I'd ask before I attempted it

I took mine apart and cleaned it. There's no hidden secrets to it so don't get too worried.
 
Hey guys... Got the engine back from the builder today and boy does she look good! I've got the engine bolted up to the trans/tcase and was going to go ahead and change fluids in them as well. I've heard conflicting info on the correct fluid for a T5...atf or GL? Also what's the correct fluid for the Dana 300? Just wanted to see what you guys were running.


 
The D300 takes 2 quarts of 80w-90 gear lube. I can't say about the T5.
 
Back
Top