Hello people,
I signed up here awhile back, knowing that eventually I would be able to interact more on these forums. I'm trying to get around to that now.
This forum seems the be all end all of information regarding the Scrambler, so I'll say Thanks In Advance for the wealth of knowledge all of you share here.
I looked around at Scramblers and classic Broncos with varying seriousness for the past year, and a few months ago finally found a Scrambler for me.
Some pics and details are below.
I'll be the first guy to admit that I'm not awesome with a wrench, so I wanted to find something that was for all intents and purposes just 'done'. An example would be a few weeks ago when a coil wire came loose outside a pizza parlor, and after 20 minutes of intense staring and poking around I finally found it. If you remember the scene from Castaway where Tom Hanks proclaimed "I HAVE MADE FIRE", that was the moment I had.
I've of course learned since that Jeeps of any flavor are apparently never 'done', but hey.
See that?? That's me basking in the glory of figuring out loose wires.
So....
It's an 84 with roughly 2700 miles on a frame-off rebuild.
258 w/ Howell TBI
Borla header
T-176
Dana 300
Solid axles
Durabak interior / POR 15 frame/undercoat
33s on original rims
and a long list of new stuff pretty much everywhere.
The PO did a ton of work, and I'm very thankful that he was a guy with attention to detail. There are a couple of engine issues that I'm dealing with related to TBI/pinging and vacuum/blow by, but I've read enough to figure out that these aren't uncommon issues, but that they need to be resolved. Preferably by somebody more experienced and likely smarter.
I signed up here awhile back, knowing that eventually I would be able to interact more on these forums. I'm trying to get around to that now.
This forum seems the be all end all of information regarding the Scrambler, so I'll say Thanks In Advance for the wealth of knowledge all of you share here.
I looked around at Scramblers and classic Broncos with varying seriousness for the past year, and a few months ago finally found a Scrambler for me.
Some pics and details are below.I'll be the first guy to admit that I'm not awesome with a wrench, so I wanted to find something that was for all intents and purposes just 'done'. An example would be a few weeks ago when a coil wire came loose outside a pizza parlor, and after 20 minutes of intense staring and poking around I finally found it. If you remember the scene from Castaway where Tom Hanks proclaimed "I HAVE MADE FIRE", that was the moment I had.
I've of course learned since that Jeeps of any flavor are apparently never 'done', but hey.
See that?? That's me basking in the glory of figuring out loose wires.
So....
It's an 84 with roughly 2700 miles on a frame-off rebuild.
258 w/ Howell TBI
Borla header
T-176
Dana 300
Solid axles
Durabak interior / POR 15 frame/undercoat
33s on original rims
and a long list of new stuff pretty much everywhere.
The PO did a ton of work, and I'm very thankful that he was a guy with attention to detail. There are a couple of engine issues that I'm dealing with related to TBI/pinging and vacuum/blow by, but I've read enough to figure out that these aren't uncommon issues, but that they need to be resolved. Preferably by somebody more experienced and likely smarter.



Welcome to the site.
Stock chrome rims have to be on just the right Jeep for me to really love them and you, sir, have that NAILED

