• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ-8 resin master build-up...step by step

This project just amazes me, as much or more than 80% of the actual Jeep projects I have seen. :cool:


Wow...looks great!

Thanks! The +++ comments mean alot!

The first test frame is cast! Once I have it back from the caster, I'll give it a once over & fit check against the body, then have him cast as many as the mold will allow(usually 30-40 copies). Then I'll finish the body & send it off to be done! :thumbsup:
 
Can't wait to get a few myself, it's looking good! Also Jeff, timing is good with the re-release of a Hotwheels Scrambler. You've got us here all hooked, but maybe with renewed interest in the Hotwheels, you could capitalize on that.
 
Still waiting for the first cast frame back from the caster :banghead: and just finishing up detail work on the tub, hardtop, & bulkhead. I've got two questions for those of you wanting a kit...was there just one upholstery pattern during the production run of Scramblers??? Also, how many actually have your OEM seats still in place, or have they been replaced with aftermarket seats? If you don't already have your CJ-7 donor kit, here's what the seats & door panels look like...sure won't work in a Scrambler! The blue seat comes close to the original style/pattern, but would need some work to be correct. The black seat & door panel are from a YJ kit and would also need work to be correct.

IMG_3530-1.jpg


close-up of YJ seat & door panel...

YJseatdoorpanel-1.jpg
 
Last edited:
WooWhoo!

Guess what I just won at the National Scramble?
Can't wait for the kits to be ready. I have been following this thread with rapt attention. Gotta go get the Revell kit so I'm ready. It'll be fun to do a Jeep project that doesn't involve greasy hands. I just hope I can keep the super glue off my hootus.

Thanks Jeff, for donating the kits for the raffle. Outstanding.:bow:
 
WooWhoo!

Guess what I just won at the National Scramble?
Can't wait for the kits to be ready. I have been following this thread with rapt attention. Gotta go get the Revell kit so I'm ready. It'll be fun to do a Jeep project that doesn't involve greasy hands. I just hope I can keep the super glue off my hootus.

Thanks Jeff, for donating the kits for the raffle. Outstanding.:bow:

Glad to hear it! I'm happy to have donated these kits...now if everything falls together soon, everyone that wants one can be building their own mini-Scrambler! :D
 
I was also one of the lucky winners!
Can't wait to start another Scrambler build!

Jeff, I'll email you my info.

Again a huge THANKS for supporting the National Scramble.
We guestimated that we had over $6K in prizes.

I know there were 3 given away.
I can't remember who was the other lucky winner besides Kevin and I ???????
 
I was also one of the lucky winners!
Can't wait to start another Scrambler build!

Jeff, I'll email you my info.

Again a huge THANKS for supporting the National Scramble.
We guestimated that we had over $6K in prizes.

I know there were 3 given away.
I can't remember who was the other lucky winner besides Kevin and I ???????

Excellent Jason!!! I still haven't found out who winner #3 is :confused:

Sorry I have no new pics to post, tub details are finished, just doing final surface prep to get it into primer & polish before sending off. Still haven't received my first frame yet :shrug: so I can do a test fit with tub to be sure everything is just so...I'll post a pic of the finished tub before I send it away!
 
Still don't have the frame back from caster!!! :banghead:

Here's the tub in first primer...all details are completed! Now to get rid of some flaws, reprime & check again...& repeat...

croppedbed-1.jpg


decided to remove grille & have it cast separately...will look more realistic and give the option of a chrome plated Laredo grille! :smokin: support at the bottom will be removed upon assembly...

croppedradsupport-1.jpg


croppedgrille-1.jpg
 
Last edited:
This is like a dream come true Jeff. One sweet project.. I love your attention to detail... way cool!!!!! :thumbsup:
z
Jeff
 
This is like a dream come true Jeff. One sweet project.. I love your attention to detail... way cool!!!!! :thumbsup:
z
Jeff

Thanks, Jeff! That means alot.

* UPDATE* Here's the first test frames...key word here "test" . Hoping for a bit better as they are produced.

IMG_44982-1.jpg


While waiting for these first castings, I've been finishing up some smaller parts...tub is DONE :thumbsup:, here's an improved door as compared to what comes in the Revell kit...

IMG_44962-1.jpg


A corrected engine block half, since they made the oil filter like a SBC, not an AMC V8!

IMG_44992-1.jpg


Also a corrected front cover assy. This is where the oil filter is supposed to go :p
Haven't found a good source for a nice straight six, I know some of you here have the AMC V8s. The 4.0L as represented in the Tamiya YJ kit I have really isn't very convincing :rolleyes:

IMG_45032-1.jpg
 
Last edited:
Jeff your attention to detail amazes me everytime I look at this thread!
Cannot wait to get a couple of these kits.:thumbsup:

OK more useless Jeep info. LOL

Regaurding your earlier post with the door and seat options.
White door is early CJ7 style hard door from 76-78ish I think. Early CJ hard door had lever style outer handle and simple straight bar interior handle. The black YJ door panel is a better representation of a CJ-8 door panel with the exception of the map pocket.

Now hurry up Im getting antsy and want to start my model! LOL

Thanks again for a your hard work my friend!

Later
Sean
 
Last edited:
Looks amazing, Jeff

Hey, a long shot question here- Do you have a line on any diecast stuff? I'm looking for one of the 1/18 scale Grand Wagoneers in white. Everyone seemed to have them for $50.00 last year, now they've seemed to evaporate....
 
Looks amazing, Jeff

Hey, a long shot question here- Do you have a line on any diecast stuff? I'm looking for one of the 1/18 scale Grand Wagoneers in white. Everyone seemed to have them for $50.00 last year, now they've seemed to evaporate....

Randy give my friend Freddy a call. You would be amazed at the stuff he can find. He's a lil eccentric but a good guy.

1(540)eight nine two-6928
 
Jeff your attention to detail amazes me everytime I look at this thread!
Cannot wait to get a couple of these kits.:thumbsup:

OK more useless Jeep info. LOL

Regaurding your earlier post with the door and seat options.
White door is early CJ7 style hard door from 76-78ish I think. Early CJ hard door had lever style outer handle and simple straight bar interior handle. The black YJ door panel is a better representation of a CJ-8 door panel with the exception of the map pocket.

Now hurry up Im getting antsy and want to start my model! LOL

Thanks again for a your hard work my friend!

Later
Sean

Thanks for the encouragement!

I won't be using the YJ door panel...not close enough for me, I'll scratchbuild some new ones!

I don't think anyone's in a bigger hurry to get these to market than me...it's in the caster's control now, we'll see how long it takes :rolleyes:



Looks amazing, Jeff

Hey, a long shot question here- Do you have a line on any diecast stuff? I'm looking for one of the 1/18 scale Grand Wagoneers in white. Everyone seemed to have them for $50.00 last year, now they've seemed to evaporate....

Thanks Randy!

I haven't bought a diecast in years...I like to build my own :thumbsup: That waggy was made by Auto Art. Hopefully Sean's friend can find one with his connections. Like you said, a while ago these were all over eBay, the last one on there was the first week in August.

Can't remember if I showed you this waggy before, but these are kinda hard to find also...but at least it's 1/25 scale...it'll match the size of your lil Scrambler & Jeepster models!
http://www.rocketfin.com/resin_product.cfm?id=4398
 
Thanks for the tip! Good looking Waggy...
 
Tub is being sent to the caster tomorrow...here's a last look in black primer. The next one you'll see will be white resin! :thumbsup:

IMG_45102-1.jpg


Here's one of my original reference pics I used...

CJ8Bottomrear-1.jpg


And my mock-up to see how close it looks to the 1:1 tub in pic...how'd I do???

tubbottom2-1.jpg
 
Last edited:
WOW THAT TURNED OUT JUST BEAUTIFUL! I can't wait to buy mine...

Jeff
 
Back
Top