• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Joe's 1982 Scrambler Restoration Thread (Retitled From: Bringing The Scrambler Home)

I'm pretty sure it is stock... since I purchased from the original owner and she never had any work done on any part of the drivetrain. I never paid attention to whether it looked different than other transfer case levers, now I'll have to go look :)

I'll ask the original owner if she ever modified the transfer case lever just in case. I'll post up the response.

Joe


It looks good, Joe! I noticed the angle of your transfer case handle/lever, and how it is "turned-up" just at the knob. I don't recall that feature as stock, but it would likely be a more user-friendly design. Is that something you changed?
 
I just looked at the archive pictures I have and you are correct, every example I have from someone else's Jeep shows the knob straight. I'm going to go out and examine mine to see if it looks like a "factory" bend or a hack... or even a cross-thread...
 
Well... I examined the D300 shifter and it was definitely made with the threaded portion for the shift knob at a different angle than the main body of the shifter. I don't know if it was intentional or just a quality control issue :)
 
Thanks for following up on that item, Joe. All it would take is a little heat on the steel to make that bend, and the only noticeable effects would be the paint that would melt. I heated my T5 shifter, since I wanted a better angle, and I just had to spray some paint on it to disguise the fact that it was manipulated.
 
The latest update to my Scrambler!

Hi Gang,

Well... now that my Ph.D. board exams are done, I actually have some time to work on the Scrambler. Yesterday I replaced the dash in the Scrambler.

The most difficult part of the whole job was cleaning up the wiring harness after the dash was removed. Jeep did a HORRIBLE job of routing wires... let's just say the wiring harness under the dash is in very nice condition now.

I'm extremely happy with the way this turned out.

Well... enough of the stories... here are the pictures:

Here's what the dash looked like just before I started:


attachmentphpattachmentid34187stc1d12765-1.jpg



The mess that was waiting for me after I removed the old dash:


attachmentphpattachmentid34188stc1d12765-1.jpg



The new dash waiting to go in:

attachmentphpattachmentid34189stc1d12765-1.jpg


The new dash installed:

attachment.php


attachmentphpattachmentid34191stc1d12765-1.jpg


attachmentphpattachmentid34192stc1d12765-1.jpg


attachmentphpattachmentid34193stc1d12765-1.jpg


attachmentphpattachmentid34194stc1d12765-1.jpg


attachmentphpattachmentid34195stc1d12765-1.jpg


attachmentphpattachmentid34196stc1d12765-1.jpg
 
And here I thought we were going to get to look at some nice, pretty wiring/routing too! (I'm a wiring detail junkie, I just rarely take the time to do it right, so I love seeing it done well :) )

Dash itself looks fantastic! :thumbsup:

Did you rework the stock wiring better or did you replace the stock wiring back to the fusepanel/bulkhead connector?
 
I reworked the factory wiring. I replaced the old crumbling tape they used, replaced the factory splice tape, routed the wires correctly and branched them off properly and then used electrical tape to protect all parts of the harness that were touching metal. I actually forgot to take a picture of it, but the next time I drop the AC unit, I'll shoot a couple of pictures and post them. The harness looks beautiful now.

And here I thought we were going to get to look at some nice, pretty wiring/routing too! (I'm a wiring detail junkie, I just rarely take the time to do it right, so I love seeing it done well :) )

Dash itself looks fantastic! :thumbsup:

Did you rework the stock wiring better or did you replace the stock wiring back to the fusepanel/bulkhead connector?
 
Good jorb, man. Not sure what to be more impressed with, the jeep or finishing your thesis. My thesis date is set for mid-July. It's made it difficult to do most of what I want to with the CJ (well, that and $ and skill), so I bet you'll be excited to finally have more time to focus on her!

...although I did recently get the courtesy lights working...small miracles and all.
 
Those of us who "can't" always admire those of you who "can", especially when it's so well done.
:thumbsup:
 
Looks great! Everything you work on ends up looking like new!:bow:
 
Hello Joe

I really like your Scrambler and you are doing some excellent work:thumbsup: I went and read the entire story (on your other site) about your purchase/rebuilding adventures and it is a great story:thumbsup:

I also know what you mean about wanting to be able to keep driving your Scrambler while you rebuild it - thats why I bought 2 LOL:thumbsup::thumbsup:

Keep up the good work:wave:
 
Hi Gang,

I just finished the latest project on the Scrambler; installing the factory wood side rails. I purchased the unfinished rails from Matt and finished them myself with 3 coats of weatherproof spar varnish.

The combination of the soft top and the wood side rails looks better than I expected.

Here are a few pictures:

attachmentphpattachmentid38066d128424764-1.jpg


attachmentphpattachmentid38067d128424764-1.jpg


attachmentphpattachmentid38068d128424764-1.jpg


attachmentphpattachmentid38069d128424764-1.jpg
 
Looks awesome!!! and i seriously LOVE that hood!!
 
Looks good, I'm blown away by how much progress you've made on your Jeep. I like the white top, wheels, and steps, together. Unique....
 
Last edited:
LOL... someday I'll get to the paint and bodywork :)

NO WAY!!! get a new/used hood and mount that one in your garage or living room or something. I think its cool!!!
 
Back
Top