- City
- Molalla
- State
- Or
Thanks. Good to know. I don't see very many of them.
What's on your Work Bench?
- Thread starter certifiablejeep
- Start date
- City
- stafford
- State
- va
Cleaned up an AX
15 today, a lot of work but it came out pretty good
15 today, a lot of work but it came out pretty good
- City
- W-S
- State
- NC
What's with showing that "man hand"? Is it because there's not a beer in it! Nice work. LOOK NEW!
- City
- stafford
- State
- va
TXJEEP
Legacy Registered User
- City
- Copper Canyon
- State
- TX
A little more progress on the dash. I had to enlarge some of the holes after the coating. Problem was that some of the sanding caused the coating to de-laminate and bubble quite a bit. Ended up stripping and starting over. Here is the latest.
- City
- Lewes
- State
- DE
Don't tease. Can you supply part numbers and where to buy?
- City
- Redmond
- State
- OR
Wow! That is one cool dash. ?? What are the two squares for?
- City
- Molalla
- State
- Or
A customer wanted some Laredo door panels for his J Truck. Too much time. I'd rather be doing steering wheels. 
- City
- East Norriton
- State
- PA
Is that a Double D dash?
- City
- Bedford
- State
- NH
- City
- stafford
- State
- va
TXJEEP
Legacy Registered User
- City
- Copper Canyon
- State
- TX
Rocker switch housing for lights, winch, and charger.
Attachments
TXJEEP
Legacy Registered User
- City
- Copper Canyon
- State
- TX
It is indeed. They do awesome work.
- City
- Bedford
- State
- NH
So, I am finally cleaning out and cleaning up a lot of things that have been put off because of the long cold winter and the fact I didn't have access to an outside hose source as they get shut off for the winter.
Stripping down 3 wheels as well as 2 center caps.
I am normally good with before and after pics, but my phone had died and was charging.
Someone had pained the cap tops RED... and a lot of paint, so the stripped helped with that.
They are far from perfect, and even with paint on them will not be great with the pits, but they will work as a driver quality.
This all started outside, then on the bench, then on the floor, then on the bench.
They need final polishing with mothers ball and polish and the Jeep & inside ring need to be relieved of the black, but all in all, I am happy with how far I got yesterday.
cb
Stripping down 3 wheels as well as 2 center caps.
I am normally good with before and after pics, but my phone had died and was charging.
Someone had pained the cap tops RED... and a lot of paint, so the stripped helped with that.
They are far from perfect, and even with paint on them will not be great with the pits, but they will work as a driver quality.
This all started outside, then on the bench, then on the floor, then on the bench.
They need final polishing with mothers ball and polish and the Jeep & inside ring need to be relieved of the black, but all in all, I am happy with how far I got yesterday.
cb
