• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Charlie's cummins diesel transplant thread

GREAT thread, I've been thinking hard about the Cummins for mine when I repower, thanks for sharing, I can't wait to hear your impressions and what kind of milage you get out of the motor.

As far as the gauges above the factory ones, I did that with my cj5 although I did start with a blank dash rather than the factory panel, In order to get around the interference from the 'defroster' duct I got an ABS unit from Qualitydraft/AEMiller and massaged it with a heat gun to clearance the space behind te dash. It didn't noticeably impact the defroster effectiveness, but then how could it on a 74 CJ 5? Just a thought. One thing I am planning whenever I get around to it is to add a gauge panel (electronics project box) to the dash bar of my roll cage and put the gauges and a switch panel in it. Also, you can get individual gauge buckets that clamp to a roll bar tube from Summit or Jegs, but you need the roll cage tubing to clamp it to.
 
On the gage clearance, what about mounting them in those angled cup mount dealios I've seen in rigs in the magazines? Would that move them out far enough from the dash to clear? I think those are cool looking too... just a thought.

Kind of like this: linky
 
As far as the gauges above the factory ones, I did that with my cj5 although I did start with a blank dash rather than the factory panel, In order to get around the interference from the 'defroster' duct I got an ABS unit from Qualitydraft/AEMiller and massaged it with a heat gun to clearance the space behind te dash. It didn't noticeably impact the defroster effectiveness, but then how could it on a 74 CJ 5? Just a thought. One thing I am planning whenever I get around to it is to add a gauge panel (electronics project box) to the dash bar of my roll cage and put the gauges and a switch panel in it. Also, you can get individual gauge buckets that clamp to a roll bar tube from Summit or Jegs, but you need the roll cage tubing to clamp it to.

I will need to do something creative like this when I get around to "doing" the AC system, probably late spring 10'. I can make a guage fit over the oil pressure but not the voltage, this would involve modding the defrost duct. I am avoiding the removal of the dash panel at all costs as this project has already led to more tangent projects than I ever intended.

On the gage clearance, what about mounting them in those angled cup mount dealios I've seen in rigs in the magazines? Would that move them out far enough from the dash to clear? I think those are cool looking too... just a thought.

The duct over and behind the voltimeter is so close it wouldn't make a difference. It's basically flush with the backside of the dash sheetmetal. There is a great spot over the headlight switch fo a guage and I was going to put the water temp there and the other two over the OP and Vmter like I mentioned, but when I couldn't fit all three, I gave up and went with the three gauge holding bracket. It'll look decent for now. Thanks for the links guys.
 
I can understand not wanting to divert from completing the transplant. When you're ready to tackle the dash, a while back, jscherb (I think) posted a redo of the dash ductwork. I think it made a lot of room behind the dash.
 
Charlie,

This is the 1st time I've seen the thread....guess I've been under a rock....or more likely a Jeep..heh Anyhow, you have done some great things here! Nice work but I'm not the least bit surprised. It's super clean and looks like a factory (but better) install.

This will be one very cool rattler when it comes out of the shop and I hope it exceeds your expectations.

I like the color of your Acme top and wonder if a subtle changing of color of the "JEEP" stamp decals might pull it together for you? Just a thought. Maybe even consider "beiging" the inlay area of the hard doors to match the top. As a trial maybe hang one and use beige masking tape in that area to see if you like it before you commit.

Kudos to you Charlie! :bow::cheers::bow::cheers::bow:

Rudy
 
Rudy,

Thanks for the compliments! I must say the photos make the whole thing look a little more glamorous than it looks in person, though I am excited about how it looks.

I completely agree with you on the Jeep stamp vinyl, who makes that in different colors? I thought about the door inlays and painting them tan. I never thought of tape to see how it would look though, that is a great idea and I have some paint left over from the top. I actually have a little paint separation starting where the window frame meets the door body. I was thinking of repairing them using the technique Jeff Scherb posted somewhere on here. This would be a great time to paint the tops.

I'm in Md, but should be home tonight to finish the hydroboost, etc. Hopefully I can fire this thing up on Sunday.
 
Not yet. I have been truckin' for about ten days and havn't had the time to finish things. All that remains for it to be started is the installation of the primary fuel line, fuel filter and all fluids. I will be in the shop today and should have it running by the evening. Should being the opperative word...

Actually, the exhaust system still needs to be finished. I should qualify the above by saying everything is done that is required to start it. The whole project still has another weeks worth of tedious little mini projects.
 
Alright, we have liftoff. It ran for the first time today. The starter my Cummins mechaninc friend found for me wasn't the correct one. Diagnosing that took a good two hours. Turns out it must have been for a later model Dodge Cummins with the 13" flywheel, while I opted to stick with the 12". I am attaching some youtube videos for your viewing pleasure. Had my uncle not blocked the jeep in our shop by leaving a 30 yard roll off can in the way, it would have made it outside. So far it seems really strong. Just getting a feel for the knew clutch (witch needs some tweeking) i chirped the rear tires. That was without giving it any throttle whatsoever. It's very loud right now. Indoors and without an exhaust, who am I kidding, it sounds awesome that way...

http://www.youtube.com/watch?v=5-0Hv-N5v2g

http://www.youtube.com/watch?v=luY0b6sDtxw

http://www.youtube.com/watch?v=PQILPYB_Tq0

FYI, I'm the geezer at the helm in the last video. -Charlie
 
Last edited:
Charlie,

All your efforts to do it right have paid off. You guys look like big kids with a new toy :)

Congrats and VERY nice job!

That is one UBERcool Scrambler!:bow::bow::bow:

Rudy

Twin Stacks now? :eek:
 
That thing sounds mean! Nothing better than the rattle of a Cummins Diesel! Very nice work! :bow:
 
Thanks guys!

Hopefully it will make it out of the shop today for a spin around the parking lot. My next big juggernaut is to figure out why none of the guages work. I must not have hooked something very key up because neither the oil pressure or voltmeter are reading.
 
grounded? all the way through to the battery? other gauges work?

Note to self: Make sure power feed to gauge panel has power. Replace blown fuse, viola!

Once I sorted the power issue out, everything worked well.
 
you ave a nice lil build going on, i am deploying in december and i hope when i get back to put a 4bt in a jeep and thinking about using the cj-8, but we will see what body i use. it's crazy the build i was thinking about doing when i come home some one else is doing it and they live in the same area. So if i do end up doinging you will become my new best freind.
 
you ave a nice lil build going on, i am deploying in december and i hope when i get back to put a 4bt in a jeep and thinking about using the cj-8, but we will see what body i use. it's crazy the build i was thinking about doing when i come home some one else is doing it and they live in the same area. So if i do end up doinging you will become my new best freind.

This subscribing to threads thing makes it easy to respond quickly. Thanks for the compliments, I'm happy to help consult in any way I can. If you really want a Jeep the Scrambler is as good as it's going to get, but maybe an LJ (if you can find one cheap enough). An older Toyota LC 60/62 or an LC 80 would be the next best thing. Good luck with your deployment.
 
i was thinking about the LJ, but i worry about the whole mass and there strict rules. I have not read of a way to get around of the emissions testing to registrar the jeep in mass. If i did go that route, with the LJ,i would probably end up registering in a more friendly state. I still have a Florida license form when i was stationed down there
 
Back
Top